Am 19.11.2012 19:21, schrieb Hans Petter Selasky: > On Monday 19 November 2012 16:36:45 Florian Jung wrote: >>> Number: 173722 >>> Category: usb >>> Synopsis: XHCI driver bug after suspend to ram (ACPI S3 mode) >>> Confidential: no >>> Severity: non-critical >>> Priority: low >>> Responsible: freebsd-usb >>> State: open >>> Quarter: >>> Keywords: >>> Date-Required: >>> Class: sw-bug >>> Submitter-Id: current-users >>> Arrival-Date: Mon Nov 19 15:40:00 UTC 2012 >>> Closed-Date: >>> Last-Modified: >>> Originator: Florian Jung >>> Release: 9.0-RELEASE-p3 >>> Organization: >> >>> Environment: >> FreeBSD beastie 9.0-RELEASE-p3 FreeBSD 9.0-RELEASE-p3 #0: Tue Jun 12 >> 02:52:29 UTC 2012 >> r...@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 >> >>> Description: >> After entering and waking up from suspend to ram aka ACPI S3 state, the >> dmesg get flooded with "xhci_interrupt: host controller halted", and my >> USB3.0 device stops working. >> >> (It is a external hard disk drive, and the device node just vanished and >> won't re-appear) >> >> My USB2.0 and 1.x devices however do still work. >> >> It seems that i can provoke the generation of these "xhci_interrupt: host >> controller halted" messages by typing on my USB-2.0-Keyboard or by moving >> my USB-2.0-Mouse. >> >>> How-To-Repeat: >> - Start up FreeBSD >> - Plug in USB3.0 Harddisk >> - It will work. >> - sudo acpiconf -S 3 >> - re-awake the computer >> - ls /dev/ tells you that the harddisk is gone >> - dmesg tells you the "xhci_interrupt: host controller halted" messages. >> - replug the harddisk >> - it still does not work. >> > > If you unplug the harddisk before the suspend, does it work afterwards then? > > --HPS >
No, that causes the same problem. I don't even need to attach it: boot freebsd, enter acpi s3, wake up, and then plug in the disk leads to the same problem. i have found out that compiling XHCI has loadable module, and unloading it before suspend and re-loading it afterwards solves the problem. the "xhci_interrupt: host controller halted"-messages don't appear, and i can use my harddisk afterwards. looks like xhci is failing to reinitalize properly after suspend? greetings, flo _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"