On Sat, Feb 09, 2013 at 03:56:53PM +0100, Hans Petter Selasky wrote:
> On Saturday 09 February 2013 13:51:56 Paul Schenkeveld wrote:
> > Hi,
> > 
> > I tried to use a USB pen camera with flash drive but get no more than:
> > 
> >   usbus7: port reset timeout
> >   uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT
> >   uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1
> >   usbd_set_config_index: could not read device status: USB_ERR_STALLED
> >   usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED,
> > ignored) usbd_req_re_enumerate: addr=3, set address failed!
> > (USB_ERR_STALLED, ignored) usb_alloc_device: Failure selecting
> > configuration index 0:USB_ERR_STALLED, port 1, addr 3 (ignored) ugen7.3:
> > <MagicPixel> at usbus7
> >   ugen7.3: <MagicPixel> at usbus7 (disconnected)
> > 
> > It works fine on a Macbook so I know it's not broken.
> > 
> > Any chance of getting this to work?
> > 
> > BTW I'm running 8.3-STABLE with a kernel built in May 2012.
> > 
> 
> Hi,
> 
> > With kind regards,
> 
> You should try 8-stable first. There has been some timing fixes in this area.

Just compiled a 8-STABLE kernel (svn rev 246578).  Initially I get the
almost same errors as above:

  usbus7: port reset timeout
  uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT
  uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1
  usbd_set_config_index: could not read device status: USB_ERR_STALLED
  usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
  usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
  usb_alloc_device: Failure selecting configuration index 0:USB_ERR_STALLED, 
port 1, addr 3 (ignored)
  ugen7.3: <MagicPixel> at usbus7
  ugen7.3: <MagicPixel> at usbus7 (disconnected)

> See: sysctl hw.usb.timings

Could not find documentation but with guessing and trying I got rid of
the first three messages using hw.usb.timings.port_powerup_delay=100:

  usbd_set_config_index: could not read device status: USB_ERR_STALLED
  usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
  usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
  usb_alloc_device: Failure selecting configuration index 0:USB_ERR_STALLED, 
port 2, addr 3 (ignored)
  ugen7.3: <MagicPixel> at usbus7
  ugen7.3: <MagicPixel> at usbus7 (disconnected)

Anything else I should try?

Thanks!

Paul Schenkeveld
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to