On Thu, 23 Jan 2014 10:54:40 +0100 Hans Petter Selasky <h...@bitfrost.no> wrote about Re: ATP USB flash failure (regression?):
HPS> The "set_config" command should be after the "add quirk" command. Any HPS> difference? Um, no? --- root@mclane:~ # usbconfig -d 1.4 add_quirk UQ_MSC_NO_SYNC_CACHE root@mclane:~ # usbconfig -d 1.1 set_config 255 root@mclane:~ # usbconfig -d 1.1 set_config 0 root@mclane:~ # usbconfig -d 1.4 reset uhub1: at usbus1, port 1, addr 1 (disconnected) ugen1.2: <vendor 0x8087> at usbus1 (disconnected) uhub3: at uhub1, port 1, addr 2 (disconnected) ugen1.3: <vendor 0x04d9> at usbus1 (disconnected) ukbd1: at uhub3, port 3, addr 3 (disconnected) ums1: at uhub3, port 3, addr 3 (disconnected) ugen1.4: <ATP Electronics> at usbus1 (disconnected) umass0: at uhub3, port 5, addr 4 (disconnected) uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: 2 ports with 2 removable, self powered ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub3: 8 ports with 8 removable, self powered ugen1.3: <vendor 0x04d9> at usbus1 ukbd1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 3> on usbus1 kbd3 at ukbd1 ums1: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 3> on usbus1 ums1: 5 buttons and [XYZ] coordinates ID=1 ugen1.4: <ATP Electronics> at usbus1 umass0: <ATP Electronics ATP IG eUSB SSD, class 0/0, rev 2.00/11.00, addr 4> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:8:0:-1: Attached to scbus8 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command umass0: at uhub3, port 5, addr 4 (disconnected) (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted umass0: <ATP Electronics ATP IG eUSB SSD, class 0/0, rev 2.00/11.00, addr 4> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:8:0:-1: Attached to scbus8 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted --- cu Gerrit _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"