Hi,

Send me the complete patch as an attachment, and I'll add it. Should we add 
this quirk for all devices made by ATP?

Thank you!

--HPS

-----Original message-----
> From:Gerrit Kühn <gerrit.ku...@aei.mpg.de <mailto:gerrit.ku...@aei.mpg.de> >
> Sent: Friday 24th January 2014 16:52
> To: Hans Petter Selasky <hans.petter.sela...@bitfrost.no 
> <mailto:hans.petter.sela...@bitfrost.no> >
> Cc: freebsd-usb@FreeBSD.org <mailto:freebsd-usb@FreeBSD.org> 
> Subject: Re: ATP USB flash failure (regression?)
> 
> On Fri, 24 Jan 2014 16:31:40 +0100 Gerrit Kühn <gerrit.ku...@aei.mpg.de 
> <mailto:gerrit.ku...@aei.mpg.de> >
> wrote about Re: ATP USB flash failure (regression?):
> 
> GK> Is it possible that "soft" rebooting is not enough and I need to cycle
> GK> the power?
> 
> It is possible: after power-cycling the machine, the device is back now:
> 
> ---
> ugen1.4: <ATP Electronics> at usbus1
> umass0: <ATP Electronics ATP IG eUSB SSD, class 0/0, rev 2.00/11.00, addr
> 4> on usbus1 umass0:  SCSI over Bulk-Only; quirks = 0x4000
> umass0:8:0:-1: Attached to scbus8
> da8 at umass-sim0 bus 0 scbus8 target 0 lun 0
> da8: <ATP ATP IG eUSB SSD 1100> Fixed Direct Access SCSI-0 device 
> da8: Serial Number 9900210100751207
> da8: 40.000MB/s transfers
> da8: 1960MB (4014080 512 byte sectors: 255H 63S/T 249C)
> da8: quirks=0x2<NO_6_BYTE>
> ---
> 
> 
> Thank you very much for your patient support!
> Will these quirks make it back into the repo, or do I have to keep this as
> a local patch here?
> 
> 
> cu
>   Gerrit
> 

_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to