>>> Is there a way to actively probe out for a device from a usb port?
>> New problem... the kernel is picking up what might be a second >> LUN and throwing a lot of errors. If this LUN is real and intentional >> I have no idea what purpose it would be for. It is not accessible >> in a usual way with dd... >> dd: /dev/da1: Device not configured >> >> [Update: This has both soldered flash and microSD slot, >> the second LUN may be the SD slot. Will test...] Tested... the second LUN is the SD slot. With card in both da0 and da1 are then usable in parallel. > There is a quirk to force a single LUN: > usbconfig -d X.Y add_quirk UQ_MSC_NO_GETMAXLUN This quiets the errors when that empty LUN, but I wouldn't add it as default to the kernel because then it does not detect card in slot. Here is device quirk if anyone wants... VID=0x054c PID=0x082a REVLO=0x0100 REVHI=0x0100 QUIRK=UQ_MSC_NO_GETMAXLUN >> Also the kernel does not print USB 'port' number except on disconnect... >> kernel: umass0: at uhub3, port 5, addr 2 (disconnected) >> It needs to print a corresponding 'connected' line on connect, >> or perhaps add the 'port' in here... >> kernel: umass0: <NAME, class 0/0, rev 2.00/1.00, addr 2> on usbus3 In addition to fixing the above port printf, I believe this sense string needs to delete the ' to ready change' part. (probe0:umass-sim0:0:0:1): SCSI status error (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 00 20 00 00 00 00 (probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:1): SCSI status: Check Condition (probe0:umass-sim0:0:0:1): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed) (probe0:umass-sim0:0:0:1): Retrying command (per sense data) Thanks. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[email protected]"
