Hi, I got the exactly same MBP 2013 11,3 from my colleague, also same time to buy it. USB driver works on this in UEFI mode. Both xhci and ehci found in this mac, and these dmesg only show in this mac:
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0 ACPI Error: No handler for Region [CMS0] (0xfffff80008948e00) [SystemCMOS] (20130823/evregion-178) ACPI Error: Region SystemCMOS (ID=5) has no handler (20130823/exfldio-320) ACPI Error: Method parse/execution failed [\134RUSB] (Node 0xfffff8000895db80), AE_NOT_EXIST (20130823/psparse-553) ACPI Error: Method parse/execution failed [\134_SB_._INI] (Node 0xfffff8000895e000), AE_NOT_EXIST (20130823/psparse-553) acpi0: Power Button (fixed) ... xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xc1e00000-0xc1e0ffff at device 20.0 on pci0 xhci0: 32 byte context size. xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xc1e19400-0xc1e197ff at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 ... ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xc1e19000-0xc1e193ff at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ... usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ... Timecounter "TSC-low" frequency 1297021897 Hz quality 1000 Root mount waiting for: usbus2 usbus1 usbus0 uhub1: 2 ports with 2 removable, self powered uhub0: 21 ports with 21 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus2 usbus1 usbus0 xhci0: Port routing mask set to 0x00000000 usb_alloc_device: device init 2 failed (USB_ERR_IOERROR, ignored) ugen0.2: <Unknown> at usbus0 (disconnected) uhub_reattach_port: could not allocate new device ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 uhub3: 6 ports with 6 removable, self powered Root mount waiting for: usbus2 usbus1 usbus0 xhci0: Port routing mask set to 0x00000000 usb_alloc_device: device init 2 failed (USB_ERR_IOERROR, ignored) ugen0.2: <Unknown> at usbus0 (disconnected) uhub_reattach_port: could not allocate new device uhub4: 8 ports with 8 removable, self powered ugen1.3: <Generic> at usbus1 umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.12, addr 3> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4101 umass0:1:0:-1: Attached to scbus1 da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-4 device da0: Serial Number E0629276 da0: 40.000MB/s transfers da0: 3870MB (7925760 512 byte sectors: 255H 63S/T 493C) da0: quirks=0x2<NO_6_BYTE> ugen1.4: <Apple Inc.> at usbus1 uhub5: <Apple Inc. BRCM20702 Hub, class 9/0, rev 2.00/1.00, addr 4> on usbus1 Root mount waiting for: usbus1 uhub5: 3 ports with 0 removable, self powered ugen1.5: <vendor 0x05ac> at usbus1 ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 5> on usbus1 kbd1 at ukbd0 Root mount waiting for: usbus1 ugen1.6: <vendor 0x05ac> at usbus1 ugen1.7: <Apple Inc.> at usbus1 Root mount waiting for: usbus1 ugen1.8: <Apple Inc.> at usbus1 ukbd1: <Apple Internal Keyboard> on usbus1 Root mount waiting for: usbus1 kbd2 at ukbd1 Full dmesg is http://sw.gddsn.org.cn/freebsd/uefi-ehci-dmesg.txt 2014-09-28 15:35 GMT+08:00 Huang Wen Hui <huang...@gmail.com>: > I found some similar problem of Linux: > https://bugzilla.kernel.org/show_bug.cgi?id=52591 > https://lkml.org/lkml/2013/3/9/134 > > > 2014-09-28 14:35 GMT+08:00 Hans Petter Selasky <h...@selasky.org>: > >> On 09/28/14 06:26, Huang Wen Hui wrote: >> >>> No lucky. dmesg aslo no change, I could not found "Skipped". >>> >>> Cheers, >>> Huang Wen Hui >>> >> >> Did you try searching if Linux users had such a problem already? >> >> --HPS >> >> > _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"