https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=200938

            Bug ID: 200938
           Summary: service moused restart required after resume from
                    suspend
           Product: Base System
           Version: 10.1-STABLE
          Hardware: Any
                OS: Any
            Status: New
          Severity: Affects Only Me
          Priority: ---
         Component: usb
          Assignee: freebsd-usb@FreeBSD.org
          Reporter: j...@ftfl.ca

After an upgrade from 10-STABLE (synced a few months ago) to 10-STABLE
r281907 (Thu Apr 23) the psm mouse (pointing stick on a Lenovo X220) no longer
works after a resume.  At BSDCan there were a number of X220s and others had
the same problem when running CURRENT.  The problems occur in both X and at the
console.

The dmesg output after putting debug.psm.loglevel=2 in /boot/loader.conf is
pasted below.

There are similar PRs, but I think this one is different since the mouse was
working after those reports and only broke in the last few months and none of
the referenced hints in /boot/loader.conf work in this case.

Adding service moused restart to rc.resume doesn't help.  Only running it from
a shell prompt after the resume works.

May  1 21:50:30 phe devd: Executing '/etc/rc.suspend acpi 0x03'
May  1 21:50:30 phe acpi: suspend at 20150501 21:50:30
May  1 21:50:33 phe kernel: uhub0: at usbus0, port 1, addr 1 (disconnected)
May  1 21:50:33 phe kernel: ugen0.2: <vendor 0x8087> at usbus0 (disconnected)
May  1 21:50:33 phe kernel: uhub2: at uhub0, port 1, addr 2 (disconnected)
May  1 21:50:33 phe kernel: ugen0.3: <Chicony Electronics Co., Ltd.> at usbus0
(disconnected)
May  1 21:50:47 phe kernel: uhub1: at usbus1, port 1, addr 1 (disconnected)
May  1 21:50:47 phe kernel: ugen1.2: <vendor 0x8087> at usbus1 (disconnected)
May  1 21:50:47 phe kernel: uhub3: at uhub1, port 1, addr 2 (disconnected)
May  1 21:50:47 phe kernel: pci0: failed to set ACPI power state D2 on
\_SB_.PCI0.EXP1: AE_BAD_PARAMETER
May  1 21:50:47 phe kernel: pci0: failed to set ACPI power state D2 on
\_SB_.PCI0.EXP2: AE_BAD_PARAMETER
May  1 21:50:47 phe kernel: pci0: failed to set ACPI power state D2 on
\_SB_.PCI0.EXP4: AE_BAD_PARAMETER
May  1 21:50:47 phe kernel: pci0: failed to set ACPI power state D2 on
\_SB_.PCI0.EXP5: AE_BAD_PARAMETER
May  1 21:50:47 phe kernel: acpi0: cleared fixed power button status
May  1 21:50:47 phe kernel: info: [drm] Enabling RC6 states: RC6 on, RC6p on,
RC6pp on
May  1 21:50:47 phe kernel: error: [drm:pid1253:intel_lvds_enable] *ERROR*
timed out waiting for panel to power off
May  1 21:50:47 phe kernel: em0: link state changed to DOWN
May  1 21:50:47 phe kernel: psm0: system resume hook called.
May  1 21:50:47 phe kernel: psm0: current command byte: 0047 (reinitialize).
May  1 21:50:47 phe kernel: psm: DISABLE_DEV return code:00fa
May  1 21:50:47 phe kernel: psm: ENABLE_DEV return code:00fa
May  1 21:50:47 phe kernel: psm: DISABLE_DEV return code:00fa
May  1 21:50:47 phe kernel: psm: SET_SAMPLING_RATE (100) 00fa
May  1 21:50:47 phe kernel: psm: SET_RESOLUTION (2) 00fa
May  1 21:50:47 phe kernel: psm: SET_SCALING11 return code:00fa
May  1 21:50:47 phe kernel: psm: SET_STREAM_MODE return code:00fa
May  1 21:50:47 phe kernel: psm: SEND_AUX_DEV_STATUS return code:00fa
May  1 21:50:47 phe kernel: psm: status 00 02 64
May  1 21:50:47 phe kernel: psm: ENABLE_DEV return code:00fa
May  1 21:50:47 phe kernel: psm: SEND_AUX_DEV_STATUS return code:00fa
May  1 21:50:47 phe kernel: psm: status 20 02 64
May  1 21:50:47 phe kernel: psm0: system resume hook exiting.
May  1 21:50:47 phe kernel: uhub0: <Intel EHCI root HUB, class 9/0, rev
2.00/1.00, addr 1> on usbus1
May  1 21:50:47 phe kernel: uhub1: <Intel EHCI root HUB, class 9/0, rev
2.00/1.00, addr 1> on usbus0
May  1 21:50:47 phe devd: Executing '/etc/rc.resume acpi 0x03'
May  1 21:50:47 phe acpi: resumed at 20150501 21:50:47
May  1 21:50:48 phe kernel: em0: link state changed to UP
May  1 21:50:48 phe devd: Executing '/etc/rc.d/dhclient quietstart em0'
May  1 21:50:48 phe kernel: uhub1: 3 ports with 3 removable, self powered
May  1 21:50:48 phe kernel: uhub0: 3 ports with 3 removable, self powered
May  1 21:50:49 phe kernel: ugen0.2: <vendor 0x8087> at usbus0
May  1 21:50:49 phe kernel: uhub2: <vendor 0x8087 product 0x0024, class 9/0,
rev 2.00/0.00, addr 2> on usbus0
May  1 21:50:49 phe kernel: ugen1.2: <vendor 0x8087> at usbus1
May  1 21:50:49 phe kernel: uhub3: <vendor 0x8087 product 0x0024, class 9/0,
rev 2.00/0.00, addr 2> on usbus1
May  1 21:50:50 phe kernel: uhub2: 6 ports with 6 removable, self powered
May  1 21:50:51 phe kernel: uhub3: 8 ports with 8 removable, self powered
May  1 21:50:51 phe kernel: ugen0.3: <Chicony Electronics Co., Ltd.> at usbus0
May  1 21:50:51 phe devd: Executing '/usr/local/etc/rc.d/webcamd start ugen0.3'
May  1 21:50:51 phe devd: Executing '/usr/local/etc/rc.d/webcamd start ugen0.3'
May  1 21:50:51 phe devd: Executing 'logger Unknown USB device: vendor 0x04f2
product 0xb217 bus uhub2'
May  1 21:50:51 phe root: Unknown USB device: vendor 0x04f2 product 0xb217 bus
uhub2
May  1 21:50:51 phe devd: Executing 'logger Unknown USB device: vendor 0x04f2
product 0xb217 bus uhub2'
May  1 21:50:51 phe root: Unknown USB device: vendor 0x04f2 product 0xb217 bus
uhub2
May  1 21:50:51 phe devd: Executing 'logger Unknown USB device: vendor 0x04f2
product 0xb217 bus uhub2'
May  1 21:50:51 phe root: Unknown USB device: vendor 0x04f2 product 0xb217 bus
uhub2
May  1 21:50:51 phe dhclient: New IP Address (em0): 192.168.2.2
May  1 21:50:51 phe dhclient: New Subnet Mask (em0): 255.255.255.0
May  1 21:50:51 phe dhclient: New Broadcast Address (em0): 192.168.2.255
May  1 21:50:51 phe dhclient: New Routers (em0): 192.168.2.1

Restart moused:

May  1 21:51:08 phe kernel: psm: DISABLE_DEV return code:00fa
May  1 21:51:08 phe kernel: psm: SEND_AUX_DEV_STATUS return code:00fa
May  1 21:51:08 phe kernel: psm: status 00 02 64
May  1 21:51:09 phe kernel: psm: ENABLE_DEV return code:00fa
May  1 21:51:09 phe kernel: psm: SEND_AUX_DEV_STATUS return code:00fa
May  1 21:51:09 phe kernel: psm: status 20 02 64
May  1 21:51:09 phe kernel: psm: SET_SAMPLING_RATE (100) 00fa
May  1 21:51:09 phe kernel: psm: SET_RESOLUTION (2) 00fa
May  1 21:51:09 phe kernel: psm: SET_SCALING11 return code:00fa
May  1 21:51:09 phe kernel: psm: SEND_AUX_DEV_STATUS return code:00fa
May  1 21:51:09 phe kernel: psm: status 20 02 64
May  1 21:51:09 phe kernel: psmintr: Sync bytes now 00c0,00c0
May 1 21:51:57 phe kernel: error: [drm:pid1498:gen6_sanitize_pm] *ERROR* Power
management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 1a000000, was
12060000
May 1 21:53:54 phe kernel: error: [drm:pid1498:gen6_sanitize_pm] *ERROR* Power
management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 1a0d0000, was
1a000000

-- 
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to