On Fri, 2016-07-22 at 18:35 +0200, O. Hartmann wrote:
> For temperature monitoring, we have a bunch of Digi Watchport/T
> sensors: 
> 
> http://ftp1.digi.com/support/documentation/90000406_H.pdf
> 
> 
[...]

I think the attached patch will make it show up as a ttyU*/cuaU* device
for you.  (You should probably use the /dev/cuaU* flavor, to avoid
problems with tty layer and modem control signals).

I keep wishing we had a mechanism, like a sysctl that could be set or
something, that would let you supply a vendor/product pair and have the
ugensa driver attach to that device, for quick testing of this sort of
thing.

-- Ian
Index: sys/dev/usb/serial/ugensa.c
===================================================================
--- sys/dev/usb/serial/ugensa.c	(revision 302505)
+++ sys/dev/usb/serial/ugensa.c	(working copy)
@@ -158,6 +158,7 @@ static const STRUCT_USB_HOST_ID ugensa_devs[] = {
 	{USB_VPI(USB_VENDOR_KYOCERA2, USB_PRODUCT_KYOCERA2_CDMA_MSM_K, 0)},
 	{USB_VPI(USB_VENDOR_HP, USB_PRODUCT_HP_49GPLUS, 0)},
 	{USB_VPI(USB_VENDOR_NOVATEL2, USB_PRODUCT_NOVATEL2_FLEXPACKGPS, 0)},
+	{USB_VPI(USB_VENDOR_INSIDEOUT, USB_PRODUCT_INSIDEOUT_WATCHPORTT, 0)},
 };
 
 DRIVER_MODULE(ugensa, uhub, ugensa_driver, ugensa_devclass, NULL, 0);
Index: sys/dev/usb/usbdevs
===================================================================
--- sys/dev/usb/usbdevs	(revision 302505)
+++ sys/dev/usb/usbdevs	(working copy)
@@ -2456,6 +2456,7 @@ product INITIO INIC_1610P	0x1e40	USB to SATA Bridg
 
 /* Inside Out Networks products */
 product INSIDEOUT EDGEPORT4	0x0001	EdgePort/4 serial ports
+product INSIDEOUT WATCHPORTT	0x0304	WatchPort/T 
 
 /* In-System products */
 product INSYSTEM F5U002		0x0002	Parallel printer
_______________________________________________
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to