On 1/2/19 11:48 AM, Matthias Apitz wrote:
El día miércoles, enero 02, 2019 a las 09:44:06a. m. +0100, Hans Petter Selasky
escribió:
On 1/1/19 2:51 PM, Matthias Apitz wrote:
Now with r342378, it works only after boot but not after withdraw/re-insert
anymore. To separate the problem from GnuPG and it's software stack, I have
here some
small tests with usbconfig(8). First usbconfig reads fine the bus, but then
it takes 3-5 minutes to get any results, see below.
Did you update the user-space libusb aswell?
I did a complete 'make installworld' and they look updated:
$ ls -l /usr/lib/libusb*
-r--r--r-- 1 root wheel 573256 31 dic. 12:19 /usr/lib/libusb_p.a
-r--r--r-- 1 root wheel 541506 31 dic. 12:19 /usr/lib/libusb.a
lrwxr-xr-x 1 root wheel 11 31 dic. 12:33 /usr/lib/libusb.so ->
libusb.so.3
-r--r--r-- 1 root wheel 98016 31 dic. 12:33 /usr/lib/libusb.so.3
-r--r--r-- 1 root wheel 73910 31 dic. 12:19 /usr/lib/libusbhid_p.a
-r--r--r-- 1 root wheel 71390 31 dic. 12:19 /usr/lib/libusbhid.a
lrwxr-xr-x 1 root wheel 14 31 dic. 12:33 /usr/lib/libusbhid.so ->
libusbhid.so.4
-r--r--r-- 1 root wheel 23720 31 dic. 12:33 /usr/lib/libusbhid.so.4
At boot time a process is launched by devd(8) which reads the OpenPGP
card and this works fine and has the device open:
$ ps ax | grep pcs
501 v0- S 0:00,22 /usr/local/sbin/pcscd --debug --foreground
# lsof -p 501
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
pcscd 501 root cwd VDIR 0,113 1024 2 /
pcscd 501 root rtd VDIR 0,113 1024 2 /
pcscd 501 root txt VREG 0,113 121992 15279826
/usr/local/sbin/pcscd
pcscd 501 root txt VREG 0,113 151560 29294355
/libexec/ld-elf.so.1
pcscd 501 root txt VREG 0,113 98016 29294906
/usr/lib/libusb.so.3
pcscd 501 root txt VREG 0,113 27640 29294864
/usr/lib/librt.so.1
pcscd 501 root txt VREG 0,113 135712 29293769
/lib/libthr.so.3
pcscd 501 root txt VREG 0,113 2063072 29294412 /lib/libc.so.7
pcscd 501 root txt VREG 0,113 135192 19033335
/usr/local/lib/pcsc/drivers/ifd-ccid.bundle/Contents/FreeBSD/libccid.so
pcscd 501 root 0r VCHR 0,43 0t0 43 /dev/null
pcscd 501 root 1u VREG 0,113 35688824 11580 /
(/dev/ada0p2)
pcscd 501 root 2u VREG 0,113 35688824 11580 /
(/dev/ada0p2)
pcscd 501 root 3u VREG 0,113 35688824 11580 /
(/dev/ada0p2)
pcscd 501 root 4u PIPE 0xfffff800162fd8e8 16384
->0xfffff800162fda50
pcscd 501 root 5u PIPE 0xfffff800162fda50 0
->0xfffff800162fd8e8
pcscd 501 root 6u unix 0xfffff800164036d0 0t0
/var/run/pcscd/pcscd.comm
pcscd 501 root 7u unix 0xfffff80016feaa38 0t0
/var/run/pcscd/pcscd.comm
pcscd 501 root 9u PIPE 0xfffff800162fd2f8 16384
->0xfffff800162fd460, cnt=2, in=2
pcscd 501 root 10u PIPE 0xfffff800162fd460 0
->0xfffff800162fd2f8
pcscd 501 root 11u PIPE 0xfffff800162f28e8 16384
->0xfffff800162f2a50
pcscd 501 root 12u PIPE 0xfffff800162f2a50 0
->0xfffff800162f28e8
pcscd 501 root 13u VCHR 0,87 0t0 87 /dev/usb/0.4.0
pcscd 501 root 14u VCHR 0,87 0t0 87 /dev/usb/0.4.0
$ gpg2 --card-status
Reader ...........: Identiv uTrust 3512 SAM slot Token (55511725600891) 00 00
Application ID ...: D27600012401020100050000532B0000
Version ..........: 2.1
Manufacturer .....: ZeitControl
Serial number ....: 0000532B
Name of cardholder: Matthias Apitz
...
When I withdraw the OpenPGP card devd(8) hooks kill that proc and
restarts a new one on card insert. But this new proc hangs.
The same happens when I disable the devd(8) start of this proc and start
the same proc from a shell (for debugging). This hangs too.
Looks like something makes the USB stack broken after the point where
devd(8) can launch fine the first proc of pcscd.
Any error messages in dmesg?
Hi,
Nothing. Only on boot it sees the card:
And you are using the latest version of pcsd ?
Jan 2 11:25:39 c720-r342378 kernel: ugen0.1: <0x8086 XHCI root HUB> at usbus0
Jan 2 11:25:39 c720-r342378 kernel: ugen1.1: <Intel EHCI root HUB> at usbus1
Jan 2 11:25:39 c720-r342378 kernel: ugen1.2: <vendor 0x8087 product 0x8000> at
usbus1
Jan 2 11:25:39 c720-r342378 kernel: ugen0.2: <SunplusIT Inc HD WebCam> at
usbus0
Jan 2 11:25:39 c720-r342378 kernel: ugen0.3: <vendor 0x0489 product 0xe056> at
usbus0
Jan 2 11:25:39 c720-r342378 kernel: ugen0.4: <Identiv uTrust 3512 SAM slot
Token> at usbus0
There has been some changes in libusb recently .
What does "procstat -ak" output. Does it hang on any "usb" functions?
--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
