Masuyama です。中川さん。よろしくお願いします。
2010-04-03 (土) の 11:54 +0900 に NAKAGAWA Tsuneo さんは書きました:
> パイプ喫いの中川です。
>
>
> On Sat, Apr 03, 2010 at 11:37:23AM +0900, Naoya Masuyama wrote:
> > Date: Sat, 03 Apr 2010 11:37:23 +0900
> > From: Naoya Masuyama <ugg06...@nifty.com>
> > Message-Id: <1270262243.5059.1.ca...@marine>
> > X-Sequence: FreeBSD-users-jp 92916
>
> > 小生のマシン環境と、それと、xorg.conf で、startx すると、画面がフリーズ
> > するというエラー回避をご鞭撻していただけると幸いです。
>
> まずは /var/log/Xorg.0.log を末尾から確認。
> 確認しても次の試行を思いつかなかったら、それも添付が宜しいかと思います。
以下に /var/log/Xorg.0.log を貼り付けて置きます。
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.3-RELEASE i386
Current Operating System: FreeBSD chacha 7.3-RELEASE FreeBSD 7.3-RELEASE
#0: Sun Mar 21 10:52:36 UTC 2010
r...@asuna:/usr/obj/pc98/usr/src/sys/GENERIC pc98
Build Date: 22 February 2010 03:43:39AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 3 10:46:23 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(==) No device specified for screen "Screen1".
Using the first device section listed.
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(--) Japanese PC98 architecture
(**) FontPath set to:
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/,
/usr/local/lib/X11/fonts/misc/,
/usr/local/lib/X11/fonts/TTF/,
/usr/local/lib/X11/fonts/OTF,
/usr/local/lib/X11/fonts/Type1/,
/usr/local/lib/X11/fonts/100dpi/,
/usr/local/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x6a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(!!) More than one possible primary device found
(--) PCI: (0:0:7:0) 1033:0009:0000:0000 NEC Corporation PCI to PC9800
Core-Graph Bridge rev 3
(--) PCI: (0:0:8:0) 1023:9660:0000:0000 Trident Microsystems TGUI
9660/938x/968x rev 211, Mem @ 0x20000000/4194304, 0x20400000/65536,
0x20800000/4194304, BIOS @ 0x????????/65536
(--) PCI: (0:0:12:0) 5333:9102:10fc:1140 S3 Inc. 86C410 Savage 2000 rev
2, Mem @ 0x20480000/524288, 0x24000000/67108864, 0x28000000/67108864,
0x2c000000/67108864, 0x30000000/67108864, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also
specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also
specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
(II) "record" will be loaded. This was enabled by default and also
specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also
specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also
specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "savage"
(II) Loading /usr/local/lib/xorg/modules/drivers//savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) SAVAGE: driver (version 2.2.1) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is:
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
(==) SAVAGE(0): RGB weight 888
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(**) SAVAGE(0): Option "NoAccel"
(WW) SAVAGE(0): Option "AccelMethod" requires an string value
(**) SAVAGE(0): Option "HWCursor"
(**) SAVAGE(0): Option "SWCursor"
(**) SAVAGE(0): Option "ShadowFB"
(**) SAVAGE(0): Option "Rotate" ""
(**) SAVAGE(0): Option "UseBIOS"
(WW) SAVAGE(0): Option "LCDClock" requires a frequency value
(**) SAVAGE(0): Option "ShadowStatus"
(**) SAVAGE(0): Option "CrtOnly"
(**) SAVAGE(0): Option "TvOn"
(**) SAVAGE(0): Option "PAL"
(**) SAVAGE(0): Option "ForceInit"
(**) SAVAGE(0): Option "Overlay" ""
(**) SAVAGE(0): Option "TransparencyKey" ""
(**) SAVAGE(0): Option "DisableXVMC"
(**) SAVAGE(0): Option "DisableTile"
(**) SAVAGE(0): Option "DisableCOB"
(**) SAVAGE(0): Option "BCIforXv"
(**) SAVAGE(0): Option "DVI"
(**) SAVAGE(0): Option "IgnoreEDID"
(**) SAVAGE(0): Option "BusType" ""
(**) SAVAGE(0): Option "DmaType" ""
(**) SAVAGE(0): Option "DmaMode" ""
(WW) SAVAGE(0): Option "AGPMode" requires an integer value
(WW) SAVAGE(0): Option "AGPSize" requires an integer value
(**) SAVAGE(0): Option "DRI"
(**) SAVAGE(0): Option: shadow FB enabled
(**) SAVAGE(0): "" is not a validvalue for Option "Rotate"
(II) SAVAGE(0): Valid options are "CW" or "CCW"
(**) SAVAGE(0): Option: NoAccel - Acceleration Disabled
(II) SAVAGE(0): Option "Overlay" not supported with shadowFB
(**) SAVAGE(0): Using SW cursor
(**) SAVAGE(0): Using video BIOS to set modes
(**) SAVAGE(0): Option: ShadowStatus enabled
(**) SAVAGE(0): Option: CrtOnly enabled
(**) SAVAGE(0): TV enabled in PAL format
(**) SAVAGE(0): Option: ForceInit enabled
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/local/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) SAVAGE(0): initializing int10
(==) SAVAGE(0): Write-combining range (0xa0000,0x20000) was already
clear
(==) SAVAGE(0): Write-combining range (0xc0000,0x40000) was already
clear
(II) SAVAGE(0): VESA BIOS not detected
(--) SAVAGE(0): Chip: id 9102, "Savage2000"
(--) SAVAGE(0): Engine: "Savage2000"
(--) SAVAGE(0): PCI card detected
(WW) SAVAGE(0): Invalid BusType option, using PCI DMA
(WW) SAVAGE(0): Invalid DmaType option, using PCI DMA
(WW) SAVAGE(0): Invalid DmaMode option
(==) SAVAGE(0): Will try command and vertex DMA mode
(**) SAVAGE(0): Option: Disable Tile Mode and Program it
(**) SAVAGE(0): Option: Disable Hardware XvMC support
(**) SAVAGE(0): Option: Disable the COB
(**) SAVAGE(0): Option: Enable use of the BCI for Xv
(**) SAVAGE(0): Force DVI port support (Savage4 only)
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 32768k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:E-EDID segment register" registered
at address 0x60.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
(EE) SAVAGE(0): Failed to fetch any BIOS modes. Disabling BIOS.
(II) SAVAGE(0): Monitor0: Using default hsync range of 31.50-37.90 kHz
(II) SAVAGE(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
(WW) SAVAGE(0): Unable to estimate virtual size
(II) SAVAGE(0): Clock range: 10.00 to 220.00 MHz
(II) SAVAGE(0): Not using default mode "640x350" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x175" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "720x400" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "360x200" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x240" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "576x432" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "896x672" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "896x672" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "1856x1392" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "928x696" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "928x696" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "832x624" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "416x312" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (width too large for
virtual size)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (width too large for
virtual size)
(--) SAVAGE(0): Virtual size is 800x600 (pitch 800)
(**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600
601 605 628 +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600
601 603 625 +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480
490 492 525 -hsync -vsync (31.5 kHz)
(**) SAVAGE(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300
300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300
300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240
245 246 262 doublescan -hsync -vsync (31.5 kHz)
(==) SAVAGE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/local/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/local/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(==) SAVAGE(0): Write-combining range (0xa0000,0x20000) was already
clear
(II) SAVAGE(0): VESA BIOS not detected
(--) SAVAGE(0): Shadow area physical 25ffffe0, linear 0x2ebfffe0
(WW) SAVAGE(0): Direct Rendering requires a tiled framebuffer -- Set
Option "DisableTile" "false"
(EE) SAVAGE(0): DRI isn't enabled
----
以上です。よろしかったら、レスください。
Naoya Masuyama
