On 7 Feb 2013, at 11:24 AM, Neel Natu <neeln...@gmail.com> wrote:
> Hi Sevan,
Hi Neel,
> At the risk of stating the obvious:
>
>> pid 17 (stty), uid 0: exited on signal 4
>> Illegal instruction
>> pid 19 (ps), uid 0: exited on signal 4
>> Illegal instruction
>
> The userland processes launched by /etc/rc are getting a SIGILL but it
> is not clear why.
>
> Could you do some experiments on your end to narrow this down a bit more:
>
> - Boot to single user and then execute a variety of commands to figure
> out whether the problem happens randomly or does is follow a
> particular executable (for e.g. execute "ps", "stty", "fsck", "find",
> "ls" etc).
>
Ok, will give it a try
> - Did this problem start happening only recently?
>
System was just built yesterday
> - If you have a different host system does it happen there too? If you
> have a different virtual machine does it happen there as well?
I dont have another system capable of running bhyve but I'll give a new machine
a try.
_______________________________________________
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to
"freebsd-virtualization-unsubscr...@freebsd.org"
