I try to passthru bge:
% pciconf -vl
ppt0@pci0:3:0:1: class=0x020000 card=0x169d103c chip=0x165714e4 rev=0x01 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'NetXtreme BCM5719 Gigabit Ethernet PCIe'
    class      = network
    subclass   = ethernet
% cat /boot/loader.conf

% bhyve -c ${VM_CPUNUM} -m ${VM_MEMSIZE} -AI -HP -g0 \
        -s 0:0,hostbridge \
        -s 3:0,passthru,3/0/1 \
        -s 2:0,virtio-blk,${VM_DISK} \
        -S 31,uart,${VM_CONSOLE} \

And I got this on boot:

bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xc0010000-0xc001ffff,0xc0020000-0xc002ffff,0xc0030000-0xc003ffff irq 36 at device 3.0 on pci0
bge0: APE FW version: NCSI v1.0.60.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
bge0: Try again
bge0: Try again
bge0: Try again
bge0: Try again
bge0: attaching PHYs failed
device_attach: bge0 attach returned 6

I used this as an instruction: https://wiki.freebsd.org/bhyve/pci_passthru
freebsd-virtualization@freebsd.org mailing list
To unsubscribe, send any mail to 

Reply via email to