Trent Thompson wrote: > According to the bhyve/Windows wiki: https://wiki.freebsd.org/bhyve/Windows > The lpc slot needs to be in slot 31, and the block devices bust be in 3, 4, > 5, and 6. > I have had luck* booting into the Debian install environment using this > method, as long as you pass "console=ttyS0" to grub at boot time. I believe > you must do the same as well on FreeBSD, with adding the ability to use a > console in /boot/loader.conf > > *I have installed Debian VMs utilizing UEFI, however I have not had success > after destroying the VM. > They fail to boot and drop you to that fancy EFI shell.
Hm... changing pci slot numbers doesn't seem to change anything: sudo /usr/sbin/bhyve -l bootrom,/home/novel/uefi/BHYVE_UEFI_20151002.fd -c 2 -m 512 -A -I -u -H -P -s 0:0,hostbridge -s 3:0,ahci-hd,/home/novel/bhyve_freebsd.img.bak -s 31,lpc -l com1,/dev/nmdm0A testvm and I get: Boot Failed. EFI Hard Drive However, when I do: sudo bhyveload -m 512 -d /home/novel/bhyve_freebsd.img.bak testvm and then: sudo /usr/sbin/bhyve -c 2 -m 512 -A -I -u -H -P -s 0:0,hostbridge -s 3:0,ahci-hd,/home/novel/bhyve_freebsd.img.bak -s 31,lpc -l com1,/dev/nmdm0A testvm I can see a console: (It fails to mount root though because my image is configured to virtio, but I guess it's not relevant to this situation). > > On Mon, Nov 2, 2015 at 10:13 AM, Roman Bogorodskiy <no...@freebsd.org> > wrote: > > > Hi, > > > > I'm facing a strange problem with -l bootrom. > > > > I try to boot a VM this way: > > > > sudo /usr/sbin/bhyve -l bootrom,/home/novel/uefi/BHYVE_UEFI_20151002.fd > > -c 2 -m 214 -A -I -u -H -P -s 0:0,hostbridge -s > > 2:0,virtio-net,tap0,mac=52:54:00:56:9a:77 -s > > 3:0,ahci-hd,/home/novel/FreeBSD-11.0-CURRENT-amd64.raw -s 1,lpc -l > > com1,/dev/nmdm0A testvm > > > > BHYVE_UEFI_20151002.fd is downloaded from . > > FreeBSD-11.0-CURRENT-amd64.raw is downloaded from . > > > > VMs fail to boot with 'Boot Failed. EFI Hard Drive' and brings into UEFI > > shell. > > > > Changing ahci-hd to virtio-blk changes error message to: > > > > 'Boot Failed. EFI Misc Device'. > > > > Dropping 'hostbridge' and 'virtio-net' doesn't seem to change anything. > > > > Also, before trying FreeBSD-11.0-CURRENT-amd64.raw I tried my old images > > I used with bhyveload and they fail in the same way, though they're > > still booting using bhyveload. > > > > I'm running -CURRENT updated last weekend on Intel i5-2310. > > > > What could be wrong with this? > > > > 1: http://people.freebsd.org/~grehan/bhyve_uefi/BHYVE_UEFI_20151002.fd > > 2: > > > > http://ftp.freebsd.org/pub/FreeBSD/snapshots/VM-IMAGES/11.0-CURRENT/amd64/Latest/FreeBSD-11.0-CURRENT-amd64.raw.xz > > > > Roman Bogorodskiy > > Roman Bogorodskiy
Description: PGP signature