Hi,

The problem is that no-one's really championing / maintaining the
FreeBSD in-tree support for the rt chips.

ray@ and bschmidt@ did a bunch of work to port over some more driver
support, but they're both busy on other things now.

A few devices in FreeBSD sorely need maintainers to actively develop
and maintain their driver - if_ral is one of them.

Thanks; I wish I could be more help.



Adrian

On 8 February 2013 03:20, Артём Морозов <hop...@gmail.com> wrote:
> Freebsd 9.1 D-link DWA-525
> I'm trying to find solution for a long time, i want to lead this wireless
> NIC to work. NIC works on chipset rt3060 which support on Free BSD from
> 2012.05, but in spite of that NIC doesn't work. I setting up it without any
> errors, but when I settings it in client mode card cannot find any works
> access point. And when I settings card in access point mode, I cannot find
> even this access point. LED indicator on the NIC show, that card is works
> and transmit data, but really, it doesn't work.
>
> #################################################################################################
> root@terst:/usr/home/asd # ifconfig -a
> ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
>         ether 84:c9:b2:7f:07:98
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
>         status: associated
> vr0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         options=82808<VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
>         ether 00:19:5b:86:11:51
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: Ethernet autoselect
> rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         options=2008<VLAN_MTU,WOL_MAGIC>
>         ether 00:e0:4c:72:62:99
>         inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: Ethernet autoselect (100baseTX <full-duplex>)
>         status: active
> re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>
> options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
>         ether 14:da:e9:ef:88:a2
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: Ethernet autoselect (10baseT/UTP <half-duplex>)
>         status: no carrier
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>         options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
>         inet6 ::1 prefixlen 128
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
>         inet 127.0.0.1 netmask 0xff000000
>         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         ether 84:c9:b2:7f:07:98
>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>         status: no carrier
>         ssid "" channel 7 (2442 MHz 11g)
>         country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
>         protmode CTS wme bintval 0
> #################################################################################################
> Copyright (c) 1992-2012 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.1-RELEASE #0 r243825: Tue Dec  4 09:23:10 UTC 2012
>     r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
> CPU: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (3110.54-MHz K8-class CPU)
>   Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping =
> 7
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0x1d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
>   AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
>   AMD Features2=0x1<LAHF>
>   TSC: P-state invariant, performance statistics
> real memory  = 8589934592 (8192 MB)
> avail memory = 8210862080 (7830 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <ALASKA A M I>
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
>  cpu2 (AP): APIC ID:  2
>  cpu3 (AP): APIC ID:  3
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <ALASKA A M I> on motherboard
> ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND
> (20110527/psargs-392)
> ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW]
> (Region) (20110527/nsinit-380)
> acpi0: Power Button (fixed)
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 550
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> Event timer "HPET3" frequency 14318180 Hz quality 440
> Event timer "HPET4" frequency 14318180 Hz quality 440
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem
> 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at
> device 0.0 on pci1
> hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xfb080000-0xfb083fff irq 17 at
> device 0.1 on pci1
> pci0: <simple comms> at device 22.0 (no driver attached)
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb407000-0xfb4073ff irq 23
> at device 26.0 on pci0
> usbus0: EHCI version 1.0
> usbus0 on ehci0
> hdac1: <Intel Cougar Point HDA Controller> mem 0xfb400000-0xfb403fff irq 22
> at device 27.0 on pci0
> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci5
> pci6: <ACPI PCI bus> on pcib6
> ral0: <Ralink Technology RT3060> mem 0xfb310000-0xfb31ffff irq 16 at device
> 0.0 on pci6
> vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xd100-0xd1ff mem
> 0xfb321000-0xfb3210ff irq 17 at device 1.0 on pci6
> vr0: Quirks: 0x0
> vr0: Revision: 0x8b
> miibus0: <MII bus> on vr0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
> ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto,
> auto-flow
> vr0: Ethernet address: 00:19:5b:86:11:51
> rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem
> 0xfb320000-0xfb3200ff irq 18 at device 2.0 on pci6
> miibus1: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> PHY 0 on miibus1
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: Ethernet address: 00:e0:4c:72:62:99
> pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
> pci7: <ACPI PCI bus> on pcib7
> atapci0: <VIA ATA controller> port
> 0xc040-0xc047,0xc030-0xc033,0xc020-0xc027,0xc010-0xc013,0xc000-0xc00f irq
> 17 at device 0.0 on pci7
> ata2: <ATA channel> at channel 0 on atapci0
> ata3: <ATA channel> at channel 1 on atapci0
> pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
> pci8: <ACPI PCI bus> on pcib8
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
> 0xb000-0xb0ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 18 at
> device 0.0 on pci
> re0: Using 1 MSI-X message
> re0: Chip rev. 0x2c000000
> re0: MAC rev. 0x00000000
> miibus2: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
> rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
> 1000baseT-FDX, 1000baseT-F
> re0: Ethernet address: 14:da:e9:ef:88:a2
> pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
> pci9: <ACPI PCI bus> on pcib9
> xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfb100000-0xfb107fff irq 19
> at device 0.0 on pci9
> xhci0: 32 byte context size.
> usbus1 on xhci0
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfb406000-0xfb4063ff irq 23
> at device 29.0 on pci0
> usbus2: EHCI version 1.0
> usbus2 on ehci1
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <Intel Cougar Point AHCI SATA controller> port
> 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem
> 0xfb405000-0xfb4057ff irq 20
> ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich3: <AHCI channel> at channel 3 on ahci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> ppc0: cannot reserve I/O port range
> ctl: CAM Target Layer loaded
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> Timecounters tick every 1.000 msec
> hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0
> hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0
> pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0
> hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0
> hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
> pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
> hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0
> hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
> pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
> hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0
> hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
> pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
> hdacc4: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
> hdaa4: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc4
> pcm4: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26
> on hdaa4
> pcm5: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa4
> pcm6: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa4
> pcm7: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa4
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 5.0Gbps Super Speed USB v3.0
> usbus2: 480Mbps High Speed USB v2.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> ugen1.1: <0x1b21> at usbus1
> uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> uhub1: 4 ports with 4 removable, self powered
> uhub0: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> ugen0.2: <vendor 0x8087> at usbus0
> uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
> usbus0
> ugen2.2: <vendor 0x8087> at usbus2
> uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
> usbus2
> uhub3: 6 ports with 6 removable, self powered
> uhub4: 8 ports with 8 removable, self powered
> ugen2.3: <A4TECH> at usbus2
> ukbd0: <A4TECH USB Device, class 0/0, rev 1.10/1.02, addr 3> on usbus2
> kbd2 at ukbd0
> ums0: <A4TECH USB Device, class 0/0, rev 1.10/1.02, addr 3> on usbus2
> ums0: 16 buttons and [XYZT] coordinates ID=0
> ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
> ada0: <SAMSUNG HD103SJ 1AJ10001> ATA-8 SATA 2.x device
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad8
> ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
> ada1: <ST1000DM005 HD103SJ 1AJ10001> ATA-8 SATA 2.x device
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
> ada1: Previously was known as ad10
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #3 Launched!
> Timecounter "TSC-low" frequency 12150537 Hz quality 1000
> Trying to mount root from ufs:/dev/ada0p2 [rw]...
> Waiting (max 60 seconds) for system process `vnlru' to stop...done
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
> Waiting (max 60 seconds) for system process `syncer' to stop...
> Syncing disks, vnodes remaining...1 0 0 done
> All buffers synced.
> Copyright (c) 1992-2012 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.1-RELEASE #0 r243825: Tue Dec  4 09:23:10 UTC 2012
>     r...@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
> CPU: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (3110.53-MHz K8-class CPU)
>   Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping =
> 7
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0x1d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
>   AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
>   AMD Features2=0x1<LAHF>
>   TSC: P-state invariant, performance statistics
> real memory  = 8589934592 (8192 MB)
> avail memory = 8210862080 (7830 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <ALASKA A M I>
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
>  cpu2 (AP): APIC ID:  2
>  cpu3 (AP): APIC ID:  3
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <ALASKA A M I> on motherboard
> ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND
> (20110527/psargs-392)
> ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW]
> (Region) (20110527/nsinit-380)
> acpi0: Power Button (fixed)
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 550
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> Event timer "HPET3" frequency 14318180 Hz quality 440
> Event timer "HPET4" frequency 14318180 Hz quality 440
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem
> 0xfa000000-0xfaffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at
> device 0.0 on pci1
> hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xfb080000-0xfb083fff irq 17 at
> device 0.1 on pci1
> pci0: <simple comms> at device 22.0 (no driver attached)
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb407000-0xfb4073ff irq 23
> at device 26.0 on pci0
> usbus0: EHCI version 1.0
> usbus0 on ehci0
> hdac1: <Intel Cougar Point HDA Controller> mem 0xfb400000-0xfb403fff irq 22
> at device 27.0 on pci0
> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci5
> pci6: <ACPI PCI bus> on pcib6
> ral0: <Ralink Technology RT3060> mem 0xfb310000-0xfb31ffff irq 16 at device
> 0.0 on pci6
> vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xd100-0xd1ff mem
> 0xfb321000-0xfb3210ff irq 17 at device 1.0 on pci6
> vr0: Quirks: 0x0
> vr0: Revision: 0x8b
> miibus0: <MII bus> on vr0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
> ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto,
> auto-flow
> vr0: Ethernet address: 00:19:5b:86:11:51
> rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem
> 0xfb320000-0xfb3200ff irq 18 at device 2.0 on pci6
> miibus1: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> PHY 0 on miibus1
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: Ethernet address: 00:e0:4c:72:62:99
> pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
> pci7: <ACPI PCI bus> on pcib7
> atapci0: <VIA ATA controller> port
> 0xc040-0xc047,0xc030-0xc033,0xc020-0xc027,0xc010-0xc013,0xc000-0xc00f irq
> 17 at device 0.0 on pci7
> ata2: <ATA channel> at channel 0 on atapci0
> ata3: <ATA channel> at channel 1 on atapci0
> pcib8: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
> pci8: <ACPI PCI bus> on pcib8
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
> 0xb000-0xb0ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 18 at
> device 0.0 on pci8
> re0: Using 1 MSI-X message
> re0: Chip rev. 0x2c000000
> re0: MAC rev. 0x00000000
> miibus2: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
> rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
> 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
> 1000baseT-FDX-flow-master, auto, auto-flow
> re0: Ethernet address: 14:da:e9:ef:88:a2
> pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
> pci9: <ACPI PCI bus> on pcib9
> xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfb100000-0xfb107fff irq 19
> at device 0.0 on pci9
> xhci0: 32 byte context size.
> usbus1 on xhci0
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfb406000-0xfb4063ff irq 23
> at device 29.0 on pci0
> usbus2: EHCI version 1.0
> usbus2 on ehci1
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <Intel Cougar Point AHCI SATA controller> port
> 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem
> 0xfb405000-0xfb4057ff irq 20 at device 31.2 on pci0
> ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich3: <AHCI channel> at channel 3 on ahci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> ppc0: cannot reserve I/O port range
> ctl: CAM Target Layer loaded
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> Timecounters tick every 1.000 msec
> hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0
> hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0
> pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0
> hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0
> hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
> pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
> hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0
> hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
> pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
> hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0
> hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
> pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
> hdacc4: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
> hdaa4: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc4
> pcm4: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26
> on hdaa4
> pcm5: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa4
> pcm6: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa4
> pcm7: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa4
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 5.0Gbps Super Speed USB v3.0
> usbus2: 480Mbps High Speed USB v2.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> ugen1.1: <0x1b21> at usbus1
> uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> uhub1: 4 ports with 4 removable, self powered
> uhub0: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> ugen0.2: <vendor 0x8087> at usbus0
> uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
> usbus0
> ugen2.2: <vendor 0x8087> at usbus2
> uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
> usbus2
> uhub3: 6 ports with 6 removable, self powered
> uhub4: 8 ports with 8 removable, self powered
> ugen2.3: <A4TECH> at usbus2
> ukbd0: <A4TECH USB Device, class 0/0, rev 1.10/1.02, addr 3> on usbus2
> kbd2 at ukbd0
> ums0: <A4TECH USB Device, class 0/0, rev 1.10/1.02, addr 3> on usbus2
> ums0: 16 buttons and [XYZT] coordinates ID=0
> ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
> ada0: <SAMSUNG HD103SJ 1AJ10001> ATA-8 SATA 2.x device
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad8
> ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
> ada1: <ST1000DM005 HD103SJ 1AJ10001> ATA-8 SATA 2.x device
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
> ada1: Previously was known as ad10
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #3 Launched!
> Timecounter "TSC-low" frequency 12150518 Hz quality 1000
> Trying to mount root from ufs:/dev/ada0p2 [rw]...
> wlan0: Ethernet address: 84:c9:b2:7f:07:98
> _______________________________________________
> freebsd-wireless@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to