How do you create the second VAP, and what's it for?
-adrian On 12 August 2013 10:26, Cedric GROSS <c...@cgross.info> wrote: > >> De : adrian.ch...@gmail.com [mailto:adrian.ch...@gmail.com] De la part >> de Adrian Chadd >> Envoyé : dimanche 11 août 2013 19:09 >> À : Cedric GROSS >> Cc : freebsd-wireless@freebsd.org >> Objet : Re: [iwn]Review Split 6 >> >> On 11 August 2013 10:06, Cedric GROSS <c...@cgross.info> wrote: >> >> > U1 stand for unit 1. >> > As you see, all function with this prefix will be call when unit==1 >> > within iwn_vap_create. >> > >> > As previously, I haven't investigate a lot this side. I plan to do so >> > when standard run will be ok. >> >> Right. But what's going on, per se? Is it two separate NICs that show >> up as separate PCI devices? Or is this a hack so the firmware can >> present two virtual NICs via the firmware API? >> > Not a separate PCI device but yes ability to create 2 wlan NIC : > > iwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 > ether 60:36:dd:93:34:56 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng > status: associated > wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 > mtu 1500 > ether 60:36:dd:93:34:56 > inet 192.168.1.20 netmask 0xffffff00 broadcast 192.168.1.255 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet MCS mode 11ng > status: associated > ssid WLenine channel 5 (2432 MHz 11g ht/20) bssid 00:24:d4:97:80:20 > country US authmode WPA2/802.11i privacy ON deftxkey UNDEF > AES-CCM 2:128-bit txpower 15 bmiss 10 scanvalid 450 bgscan > bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64 protmode CTS > ampdulimit 64k -amsdutx amsdurx shortgi wme roaming MANUAL bintval > 96 > wlan1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 60:36:dd:93:34:57 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid "" channel 5 (2432 MHz 11g ht/20) > country US authmode OPEN privacy OFF txpower 15 bmiss 10 scanvalid > 60 > bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64 > protmode CTS ampdulimit 8k -amsdutx amsdurx shortgi wme bintval 0 > _______________________________________________ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
