On Tue, 2013-11-05 at 17:15 -0800, Adrian Chadd wrote:
> Hi,
> So:
> http://people.freebsd.org/~adrian/iwn/20131105-iwn-update-works-full-5100-5.diff
> This is my attempt at merging in all of Cedric's work to date, _minus_
> the PAN stuff. Ie, it's only the hardware addons. It turns out that
> it's not that big a change - a large part of the diff is just the
> config options.
> The biggest annoyance here is the calibration stuff. If the wrong
> calibration commands are sent up (ie, not all of them, in the right
> order!) then the firmware just panics after association.
> So, all I've done thus far is test it on my Intel 5100. Next is
> testing it on the 4965. After that, I'll try the 6xxx, 2xxx and 1xxx /
> 100 series stuff.
> I'd appreciate some testing of this. It's against -HEAD, so yes,
> you'll have to run -HEAD.
> Thanks,
> -adrian
> _______________________________________________
> freebsd-wireless@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Initial test looks good.  I've enabled bluetooth to make sure that it
doesn't break iwn(4) and I see no issues running on wireless.

I reverted my hack to disable 11N support and iwn(4) still has serious
issues negotiating with my $DAYJOB wireless APs.  So, I'm still running
with 11N disabled for now.


Attachment: signature.asc
Description: This is a digitally signed message part

Reply via email to