Try 10.0b4 and run with it again. It may have been a fluke. Which laptop is
it? It could be some cut price version I need driver hacks for :(

Adrian
On Dec 7, 2013 2:45 PM, "Peter Edson" <pete.ed...@gmail.com> wrote:

> it worked on 10 beta 4. Was autodetected during the USB install process.
>
> I used wpa supplicant to configure it and it worked fine until I rebooted,
> then it just stopped working for apparently no reason (you'd know a hell of
> a lot better than I would)
>
> It was not detected in 9.2, which is why I installed 10 beta 4
>
>
> On Sat, Dec 7, 2013 at 5:42 PM, Adrian Chadd <adr...@freebsd.org> wrote:
>
>> Huh? 10.0 works fine on the 9565? Ive not changed anything in the ath
>> driver since then.
>>
>> Adrian
>> On Dec 7, 2013 2:14 PM, "Peter Edson" <pete.ed...@gmail.com> wrote:
>>
>>> when I do the destroy, it says it wasn't already configured.
>>>
>>>  when I get to the supplicant part it says wpa_supplicant 1046 ioctl
>>> something something operation not supported.
>>>
>>> then it tried to associate for awhile and says ctrl-event-disconnected
>>> reason=3 local=1
>>>
>>> and authentication timed out
>>>
>>> I get ath0_edma_recv_tasklet: sc_interest_cnt > 0; skipping on the
>>> screen printed out alot.
>>>
>>>
>>> Anyway thanks for the help I guess I should just reinstall 10 beta 4
>>> again since it was working?
>>>
>>> If this pops up again I guess i'll have to use windows for awhile :-(
>>> till this gets hammered out as my NIC and my wifi aren't working on freebsd
>>> at the moment, I guess this laptop is too new
>>>
>>>
>>> On Sat, Dec 7, 2013 at 12:47 PM, Adrian Chadd <adr...@freebsd.org>wrote:
>>>
>>>> It should be working. :(
>>>>
>>>> Try doing it all manually:
>>>>
>>>> * comment out wpa / ifconfig lines for wifi in /etc/rc.conf
>>>>
>>>> # ifconfig wlan0 destroy
>>>> # ifconfig wlan0 create wlandev ath0
>>>> # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf &
>>>>
>>>> .. see if that works.
>>>>
>>>>
>>>>
>>>> -a
>>>>
>>>> On 7 December 2013 02:10, Peter Edson <pete.ed...@gmail.com> wrote:
>>>> > here is my rc.conf /boot/loader.conf /etc/wpa_supplicant.conf and all
>>>> kernel
>>>> > output
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > On Sat, Dec 7, 2013 at 1:22 AM, Adrian Chadd <adr...@freebsd.org>
>>>> wrote:
>>>> >>
>>>> >> What's logged in dmesg?
>>>> >>
>>>> >>
>>>> >> -a
>>>> >>
>>>> >> On 6 December 2013 20:56, Peter Edson <pete.ed...@gmail.com> wrote:
>>>> >> > Hi, I installed freebsd 10 beta 4 today and it autodetected the
>>>> atheros
>>>> >> > 9565 chip and I got it setup no problem with wpa_supplicant. I
>>>> installed
>>>> >> > some stuff like xorg and i3 wm and then took a nap. I woke up and
>>>> >> > rebooted
>>>> >> > the machine and it will not work on any wifi settings now.
>>>> >> >
>>>> >> > It keeps throwing errors about /var/run/wpa_supplicant failed to
>>>> >> > initialize
>>>> >> > control interface and remove the file, this is when I run service
>>>> netif
>>>> >> > restart, start etc. I have tried removing it and it doesn't help.
>>>> >> >
>>>> >> > my pci conf for atheros looks like this:
>>>> >> >
>>>> >> > ath0@pci0:3:0:0:
>>>> >> >
>>>> >> > class = 0x028000 card=0x063211ad chip=0x0036168c rev=0x01 hdr=0x00
>>>> >> >
>>>> >> > vendor= atheros communications
>>>> >> > device= ar9565 wireless network adapter
>>>> >> > class = network
>>>> >> > _______________________________________________
>>>> >> > freebsd-sta...@freebsd.org mailing list
>>>> >> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>>>> >> > To unsubscribe, send any mail to
>>>> >> > "freebsd-stable-unsubscr...@freebsd.org"
>>>> >
>>>> >
>>>>
>>>
>>>
>
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to