Well does it work manually on head? I'd like to make sure there are no problems there. On Dec 7, 2013 7:36 PM, "Peter Edson" <pete.ed...@gmail.com> wrote:
> Hey, I went ahead and reinstalled 10 beta 4 and it does not work > automatically, but running the commands manually does work -- even rebooted > and it is still working. > > So that is awesome, just hope it keeps working. I still need to install > xorg/i3 like before but I'll assume it's gonna stay working since those > shouldn't have much to do with it working but I am trying to follow the > steps I did last time to pinpoint any errors. > > I'll let you know if I run in to any problems thanks so much for the > support. > > > On Sat, Dec 7, 2013 at 5:52 PM, Peter Edson <pete.ed...@gmail.com> wrote: > >> It's actually a really nice laptop for what I paid for it in my opinion >> :-) I bought it from the microsoft store of all places on black friday for >> like half off! lol. >> >> >> it's a gateway (acer) nv570p10u >> >> has an i5 ivy bridge 3337U >> >> 15.6" screen b/g/n wifi (as you know) >> Touch screen i'll probably never use. >> >> Not bad for 329$ >> >> replaced the hdd with an ssd of course. >> >> >> Anyway I gotta study for a big anatomy test for the rest of the weekend >> but monday or tuesday i'll reinstall and i'll email you and let you know if >> it works after a reboot. >> >> I figure i'll get the wifi up and running again like I did the first >> time. Reboot, make sure it works. >> >> Install xorg/i3wm like I did reboot again and hope it works heh. >> >> >> >> >> >> >> >> On Sat, Dec 7, 2013 at 5:46 PM, Adrian Chadd <adr...@freebsd.org> wrote: >> >>> Try 10.0b4 and run with it again. It may have been a fluke. Which laptop >>> is it? It could be some cut price version I need driver hacks for :( >>> >>> Adrian >>> On Dec 7, 2013 2:45 PM, "Peter Edson" <pete.ed...@gmail.com> wrote: >>> >>>> it worked on 10 beta 4. Was autodetected during the USB install process. >>>> >>>> I used wpa supplicant to configure it and it worked fine until I >>>> rebooted, then it just stopped working for apparently no reason (you'd know >>>> a hell of a lot better than I would) >>>> >>>> It was not detected in 9.2, which is why I installed 10 beta 4 >>>> >>>> >>>> On Sat, Dec 7, 2013 at 5:42 PM, Adrian Chadd <adr...@freebsd.org>wrote: >>>> >>>>> Huh? 10.0 works fine on the 9565? Ive not changed anything in the ath >>>>> driver since then. >>>>> >>>>> Adrian >>>>> On Dec 7, 2013 2:14 PM, "Peter Edson" <pete.ed...@gmail.com> wrote: >>>>> >>>>>> when I do the destroy, it says it wasn't already configured. >>>>>> >>>>>> when I get to the supplicant part it says wpa_supplicant 1046 ioctl >>>>>> something something operation not supported. >>>>>> >>>>>> then it tried to associate for awhile and says >>>>>> ctrl-event-disconnected reason=3 local=1 >>>>>> >>>>>> and authentication timed out >>>>>> >>>>>> I get ath0_edma_recv_tasklet: sc_interest_cnt > 0; skipping on the >>>>>> screen printed out alot. >>>>>> >>>>>> >>>>>> Anyway thanks for the help I guess I should just reinstall 10 beta 4 >>>>>> again since it was working? >>>>>> >>>>>> If this pops up again I guess i'll have to use windows for awhile :-( >>>>>> till this gets hammered out as my NIC and my wifi aren't working on >>>>>> freebsd >>>>>> at the moment, I guess this laptop is too new >>>>>> >>>>>> >>>>>> On Sat, Dec 7, 2013 at 12:47 PM, Adrian Chadd <adr...@freebsd.org>wrote: >>>>>> >>>>>>> It should be working. :( >>>>>>> >>>>>>> Try doing it all manually: >>>>>>> >>>>>>> * comment out wpa / ifconfig lines for wifi in /etc/rc.conf >>>>>>> >>>>>>> # ifconfig wlan0 destroy >>>>>>> # ifconfig wlan0 create wlandev ath0 >>>>>>> # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf & >>>>>>> >>>>>>> .. see if that works. >>>>>>> >>>>>>> >>>>>>> >>>>>>> -a >>>>>>> >>>>>>> On 7 December 2013 02:10, Peter Edson <pete.ed...@gmail.com> wrote: >>>>>>> > here is my rc.conf /boot/loader.conf /etc/wpa_supplicant.conf and >>>>>>> all kernel >>>>>>> > output >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > On Sat, Dec 7, 2013 at 1:22 AM, Adrian Chadd <adr...@freebsd.org> >>>>>>> wrote: >>>>>>> >> >>>>>>> >> What's logged in dmesg? >>>>>>> >> >>>>>>> >> >>>>>>> >> -a >>>>>>> >> >>>>>>> >> On 6 December 2013 20:56, Peter Edson <pete.ed...@gmail.com> >>>>>>> wrote: >>>>>>> >> > Hi, I installed freebsd 10 beta 4 today and it autodetected the >>>>>>> atheros >>>>>>> >> > 9565 chip and I got it setup no problem with wpa_supplicant. I >>>>>>> installed >>>>>>> >> > some stuff like xorg and i3 wm and then took a nap. I woke up >>>>>>> and >>>>>>> >> > rebooted >>>>>>> >> > the machine and it will not work on any wifi settings now. >>>>>>> >> > >>>>>>> >> > It keeps throwing errors about /var/run/wpa_supplicant failed to >>>>>>> >> > initialize >>>>>>> >> > control interface and remove the file, this is when I run >>>>>>> service netif >>>>>>> >> > restart, start etc. I have tried removing it and it doesn't >>>>>>> help. >>>>>>> >> > >>>>>>> >> > my pci conf for atheros looks like this: >>>>>>> >> > >>>>>>> >> > ath0@pci0:3:0:0: >>>>>>> >> > >>>>>>> >> > class = 0x028000 card=0x063211ad chip=0x0036168c rev=0x01 >>>>>>> hdr=0x00 >>>>>>> >> > >>>>>>> >> > vendor= atheros communications >>>>>>> >> > device= ar9565 wireless network adapter >>>>>>> >> > class = network >>>>>>> >> > _______________________________________________ >>>>>>> >> > freebsd-sta...@freebsd.org mailing list >>>>>>> >> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable >>>>>>> >> > To unsubscribe, send any mail to >>>>>>> >> > "freebsd-stable-unsubscr...@freebsd.org" >>>>>>> > >>>>>>> > >>>>>>> >>>>>> >>>>>> >>>> >> > _______________________________________________ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
