Ok, please do.

I have a T60 with me and some AR5418 NICs, so I don't mind doing a
transplant and trying to make it work!


-a



On 5 January 2014 08:53, Lyubomir Yotov <l.yo...@gmail.com> wrote:

> Not yet but I will give it a go these days.
>
> Thanks,
>
> Lyubomir
>
>
> On 5 January 2014 09:45, Adrian Chadd <adr...@freebsd.org> wrote:
>
>> Have you tried -11?
>>
>>
>> -a
>>
>>
>> On 30 December 2013 09:25, Lyubomir Yotov <l.yo...@gmail.com> wrote:
>>
>>> Hi Andrian,
>>>
>>> Merry Christmas and all the best for the New Year!
>>> I would like to ask if there is something on the horizon with the
>>> Atheros time outs? Is there any chance in getting it working without
>>> restart to Windows (in my case)? Is there anything else I can try?
>>> Currently I am with 9.2-RELEASE #0 r255898.
>>>
>>> All the best,
>>>
>>> Lyubomir
>>>
>>>
>>> On 17 July 2013 23:06, Lyubomir Yotov <l.yo...@gmail.com> wrote:
>>>
>>>> Hi,
>>>> No problem, I fully understand you. If you manage to find something I
>>>> will be more than grateful. Anyway thanks for your time! I think you are
>>>> doing quite a god job!
>>>>
>>>>
>>>>
>>>> Regards,
>>>>
>>>> Lyubo
>>>>
>>>>
>>>>
>>>> On 16 July 2013 11:51, Adrian Chadd <adr...@freebsd.org> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> I'm sorry, I don't have the time to try and debug this issue. If I had
>>>>> a T60 here that demonstrated this behaviour then I could try to fix it. 
>>>>> But
>>>>> I unfortunately don't; all my T60 hardware has intel wifi. :(
>>>>>
>>>>> I can try putting an AR5418 in a T60 in a few weeks and see if it
>>>>> exhibits this behaviour. But don't hold your breath.
>>>>>
>>>>> Sorry :(
>>>>>
>>>>>
>>>>>
>>>>> -adrian
>>>>>
>>>>>
>>>>> On 15 July 2013 13:30, Lyubomir Yotov <l.yo...@gmail.com> wrote:
>>>>>
>>>>>> Hi Adrian,
>>>>>> I tried with -HEAD liveCD as proposed by Vincent and ghostbsd live cd
>>>>>> but the situation is the same. I feel like I am missing something. On one
>>>>>> hand I can scan the wireless networks and the wifi card seems to be
>>>>>> working. On the other hand I cannot attach as the ath device times out
>>>>>> (which according to the ath man pages should not occur). I also tried to
>>>>>> encrypt the psk phrase with pwa_passphrase but with no success either. I
>>>>>> tested with Kali linux  live cd and the wireless was working fine. I also
>>>>>> noticed that if I shutdown Windows and then start FreeBSD then the wifi
>>>>>> also behaves the same way - ath0: device timed out. Only restart from
>>>>>> Windows or restart from FreeBSD with working wifi can make the wifi work
>>>>>> again.
>>>>>> Do you have any other proposals?
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Lyubomir
>>>>>>
>>>>>>
>>>>>> On 24 June 2013 23:39, Vincent Hoffman <vi...@unsane.co.uk> wrote:
>>>>>>
>>>>>>> As an easy test if you arent keen on making the leap just yet I'd
>>>>>>> suggest getting a snapshot CD and just boot it as a liveCD to test.
>>>>>>> either a snapshot
>>>>>>> http://www.freebsd.org/snapshots/
>>>>>>> or one of the daily builds from
>>>>>>> https://pub.allbsd.org/FreeBSD-snapshots/
>>>>>>> (for example
>>>>>>>
>>>>>>> https://pub.allbsd.org/FreeBSD-snapshots/amd64-amd64/10.0-HEAD-r252115-JPSNAP/iso/FreeBSD-10.0-HEAD-r252115-JPSNAP-amd64-amd64-release.iso
>>>>>>> )
>>>>>>>
>>>>>>> That said I run -CURRENT on my server at home (for the atheros
>>>>>>> driver)
>>>>>>> and dont have any problems with it.
>>>>>>>
>>>>>>> Vince
>>>>>>>
>>>>>>>
>>>>>>> On 24/06/2013 21:01, Lyubomir Yotov wrote:
>>>>>>> > Hi Adrian,
>>>>>>> >
>>>>>>> > I will try to get -HEAD on my T60 and will report back.
>>>>>>> >
>>>>>>> > Regards,
>>>>>>> >
>>>>>>> > Lyubomir
>>>>>>> >
>>>>>>> >
>>>>>>> > On 24 June 2013 20:21, Adrian Chadd <adr...@freebsd.org> wrote:
>>>>>>> >
>>>>>>> >> Hi,
>>>>>>> >>
>>>>>>> >> Would you be willing to try a -HEAD snapshot on your laptop?
>>>>>>> >>
>>>>>>> >> Maybe I've fixed it as part of the other driver work that I've
>>>>>>> done as
>>>>>>> >> part of development in -HEAD.
>>>>>>> >>
>>>>>>> >> But right now I really have no idea. I don't have a T60 here that
>>>>>>> has
>>>>>>> >> that chip in it. If all the T60 BIOSes allow AR5418 NICs then I
>>>>>>> can
>>>>>>> >> try it out, but all of the T60's I've played with thus far have
>>>>>>> the
>>>>>>> >> intel hardware in it.
>>>>>>> >>
>>>>>>> >>
>>>>>>> >>
>>>>>>> >> Adrian
>>>>>>> >>
>>>>>>> >>
>>>>>>> >> On 21 June 2013 02:02, Lyubomir Yotov <l.yo...@gmail.com> wrote:
>>>>>>> >>> Hello Adrian,
>>>>>>> >>>
>>>>>>> >>> Do you have any feedback on the matter?
>>>>>>> >>>
>>>>>>> >>> Regards,
>>>>>>> >>>
>>>>>>> >>> Lyubomir
>>>>>>> >>>
>>>>>>> >>>
>>>>>>> >>> On 13 June 2013 10:09, Lyubomir Yotov <l.yo...@gmail.com> wrote:
>>>>>>> >>>> Hello Adrian,
>>>>>>> >>>>
>>>>>>> >>>> I enabled acpi_ibm.ko but this didn't help and after "halt" the
>>>>>>> wifi is
>>>>>>> >>>> not working again.
>>>>>>> >>>>
>>>>>>> >>>> Regards,
>>>>>>> >>>>
>>>>>>> >>>> Lyubomir
>>>>>>> >>>>
>>>>>>> >>>>
>>>>>>> >>>> On 13 June 2013 08:03, Lyubomir Yotov <l.yo...@gmail.com>
>>>>>>> wrote:
>>>>>>> >>>>> Hello Adrian,
>>>>>>> >>>>> I did some tests and discovered that the problem is related to
>>>>>>> >>>>> "halt"/"shutdown" of system. If "reboot" is carried out than
>>>>>>> there is
>>>>>>> >> no
>>>>>>> >>>>> problem and the wifi works properly (even if done from Gnome -
>>>>>>> Gnome
>>>>>>> >> seems
>>>>>>> >>>>> to have no relation to the problem). So what could lead to
>>>>>>> "ath0: time
>>>>>>> >> out"
>>>>>>> >>>>> after shutting down or halting the system? I noticed that
>>>>>>> there are irq
>>>>>>> >>>>> storms on irq 17 which is the wifi irq (interrupt storm
>>>>>>> detected on
>>>>>>> >>>>> "irq17:"; throttling interrupt source). Something else that I
>>>>>>> am not
>>>>>>> >> sure to
>>>>>>> >>>>> have relevance - after shutdown during the start-up ath0 is
>>>>>>> reported
>>>>>>> >> to use
>>>>>>> >>>>> autoselect mode 11g:
>>>>>>> >>>>> (below is from dmesg)
>>>>>>> >>>>>
>>>>>>> >>>>> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
>>>>>>> metric 0 mtu
>>>>>>> >>>>> 2290
>>>>>>> >>>>>
>>>>>>> >>>>>         ether 00:19:7e:91:xx:xx
>>>>>>> >>>>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>>>> >>>>>         media: IEEE 802.11 Wireless Ethernet autoselect mode
>>>>>>> 11g
>>>>>>> >>>>>         status: associated
>>>>>>> >>>>>
>>>>>>> >>>>> After the boot has finished the mode changes to 11a:
>>>>>>> >>>>>
>>>>>>> >>>>> #ifconfig ath0
>>>>>>> >>>>>
>>>>>>> >>>>> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
>>>>>>> metric 0 mtu
>>>>>>> >>>>> 2290
>>>>>>> >>>>>         ether 00:19:7e:91:xx:xx
>>>>>>> >>>>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>>>> >>>>>         media: IEEE 802.11 Wireless Ethernet autoselect mode
>>>>>>> 11a
>>>>>>> >>>>>         status: associated
>>>>>>> >>>>>
>>>>>>> >>>>> Do you have any idea where to look for now?
>>>>>>> >>>>>
>>>>>>> >>>>> Regards,
>>>>>>> >>>>>
>>>>>>> >>>>>
>>>>>>> >>>>> Lyubomir
>>>>>>> >>>>> P.S. I will try to play with acpi_ibm.ko and see if things
>>>>>>> change if I
>>>>>>> >>>>> make it auto-load.
>>>>>>> >>>>>
>>>>>>> >>>>>
>>>>>>> >>>>> On 10 June 2013 16:06, Lyubomir Yotov <l.yo...@gmail.com>
>>>>>>> wrote:
>>>>>>> >>>>>> Hello Adrian,
>>>>>>> >>>>>>
>>>>>>> >>>>>> Attached are files with consecutive vmstat -i when the wlan
>>>>>>> is working
>>>>>>> >>>>>> (vmstat-i_working.txt) and when the wlan is not working
>>>>>>> >>>>>> (vmstat-i_not_working.txt). There is also output from
>>>>>>> ifconfig when
>>>>>>> >> the wlan
>>>>>>> >>>>>> is not working (ifconfig.txt).
>>>>>>> >>>>>> After some more deeper investigation it seems to me that the
>>>>>>> problem
>>>>>>> >>>>>> appears after starting X with Gnome. I will continue
>>>>>>> investigating
>>>>>>> >> with
>>>>>>> >>>>>> "reboot"/"halt -p" and inform you.
>>>>>>> >>>>>> BTW do you think that starting Gnome session (using startx,
>>>>>>> as I
>>>>>>> >> haven't
>>>>>>> >>>>>> set auto start of X if this is of any importance) can cause
>>>>>>> problems
>>>>>>> >> - in
>>>>>>> >>>>>> Gnome I have no settings for the network in the
>>>>>>> "System->Network"
>>>>>>> >>>>>> application and I start it with normal user?
>>>>>>> >>>>>>
>>>>>>> >>>>>> Regards,
>>>>>>> >>>>>>
>>>>>>> >>>>>> Lyubo
>>>>>>> >>>>>>
>>>>>>> >>>>>>
>>>>>>> >>>>>> On 9 June 2013 18:28, Adrian Chadd <adr...@freebsd.org>
>>>>>>> wrote:
>>>>>>> >>>>>>> Can you please paste the vmstat -i output?
>>>>>>> >>>>>>>
>>>>>>> >>>>>>>
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> adrian
>>>>>>> >>>>>>>
>>>>>>> >>>>>>> On 9 June 2013 06:53, Lyubomir Yotov <l.yo...@gmail.com>
>>>>>>> wrote:
>>>>>>> >>>>>>>> Hi,
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> After restart from Windows and working wireless the number
>>>>>>> of
>>>>>>> >>>>>>>> interrupts
>>>>>>> >>>>>>>> increases and the rate increases. After next restart (the
>>>>>>> ath0
>>>>>>> >> times
>>>>>>> >>>>>>>> out)
>>>>>>> >>>>>>>> the interrupts increase but the rate is going down.
>>>>>>> >>>>>>>> I noticed that after restart from Windows and working wifi
>>>>>>> if I
>>>>>>> >>>>>>>> restart
>>>>>>> >>>>>>>> /etc/rc.d/netif the wifi is working again. If I shutdown
>>>>>>> wlan0 and
>>>>>>> >>>>>>>> bring it
>>>>>>> >>>>>>>> up again then I wlan0 doesn't get address but ath0 is not
>>>>>>> timing
>>>>>>> >> out.
>>>>>>> >>>>>>>> I can
>>>>>>> >>>>>>>> still get a list with the available APs around.
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> Regards,
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> Lyubo
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>>> On 8 June 2013 18:28, Adrian Chadd <adr...@freebsd.org>
>>>>>>> wrote:
>>>>>>> >>>>>>>>> Hm!
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> Ok, this should be working. I frequently test (read: every
>>>>>>> other
>>>>>>> >>>>>>>>> day)
>>>>>>> >>>>>>>>> with the AR5416. But you're not the first person to report
>>>>>>> this
>>>>>>> >> bug.
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> Unfortunately when this happens, the interrupts aren't
>>>>>>> actually
>>>>>>> >>>>>>>>> making
>>>>>>> >>>>>>>>> it to the OS.
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> Can you check the output of vmstat -i whilst you're doing
>>>>>>> it? The
>>>>>>> >>>>>>>>> ath0
>>>>>>> >>>>>>>>> counter should be increasing.
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> adrian
>>>>>>> >>>>>>>>>
>>>>>>> >>>>>>>>> On 8 June 2013 06:49, Lyubomir Yotov <l.yo...@gmail.com>
>>>>>>> wrote:
>>>>>>> >>>>>>>>>> Hello,
>>>>>>> >>>>>>>>>> I have a Thinkpad T60 with dual boot between Windows XP
>>>>>>> and
>>>>>>> >>>>>>>>>> FreeBSD
>>>>>>> >>>>>>>>>> 9.1-Release:
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> uname -a
>>>>>>> >>>>>>>>>> FreeBSD T60.workgroup 9.1-RELEASE FreeBSD 9.1-RELEASE #0
>>>>>>> >> r243826:
>>>>>>> >>>>>>>>>> Tue
>>>>>>> >>>>>>>>>> Dec
>>>>>>> >>>>>>>>>> 4 06:55:39 UTC 2012
>>>>>>> >>>>>>>>>> r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>>>>>>> >>>>>>>>>> i386
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> I am trying to use my wifi card which is:
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> dmesg
>>>>>>> >>>>>>>>>> ....
>>>>>>> >>>>>>>>>> ath0: <Atheros 5416> mem 0xedf00000-0xedf0ffff irq 17 at
>>>>>>> device
>>>>>>> >>>>>>>>>> 0.0 on
>>>>>>> >>>>>>>>>> pci3
>>>>>>> >>>>>>>>>> ath0: AR5418 mac 12.10 RF5133 phy 8.1
>>>>>>> >>>>>>>>>> ....
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> pciconf -lv
>>>>>>> >>>>>>>>>> ....
>>>>>>> >>>>>>>>>> ath0@pci0:3:0:0:        class=0x028000 card=0x0033168c
>>>>>>> >>>>>>>>>> chip=0x0024168c
>>>>>>> >>>>>>>>>> rev=0x01 hdr=0x00
>>>>>>> >>>>>>>>>>     vendor     = 'Atheros Communications Inc.'
>>>>>>> >>>>>>>>>>     device     = 'AR5008 Wireless Network Adapter'
>>>>>>> >>>>>>>>>>     class      = network
>>>>>>> >>>>>>>>>> .....
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> I followed several HOW-TOs in order to make it work.
>>>>>>> >> Unfortunately
>>>>>>> >>>>>>>>>> I it
>>>>>>> >>>>>>>>>> is
>>>>>>> >>>>>>>>>> working only after I reboot from my Windows installation
>>>>>>> >>>>>>>>>> (regardless of
>>>>>>> >>>>>>>>>> the
>>>>>>> >>>>>>>>>> position of the wifi switch on the front panel of the
>>>>>>> notebook).
>>>>>>> >>>>>>>>>> After
>>>>>>> >>>>>>>>>> restart from Windows everything is fine - the wifi
>>>>>>> associates
>>>>>>> >> with
>>>>>>> >>>>>>>>>> the
>>>>>>> >>>>>>>>>> AP
>>>>>>> >>>>>>>>>> and I can use it. If I reboot the system during the boot
>>>>>>> and
>>>>>>> >>>>>>>>>> afterwards
>>>>>>> >>>>>>>>>> I
>>>>>>> >>>>>>>>>> constantly get:
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> ath0: device timeout
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> When I get the device status through ifconfig I can see
>>>>>>> that
>>>>>>> >> ath0
>>>>>>> >>>>>>>>>> is
>>>>>>> >>>>>>>>>> associated but wlan0 is not associated.
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> ifconfig ath0
>>>>>>> >>>>>>>>>> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
>>>>>>> metric
>>>>>>> >> 0
>>>>>>> >>>>>>>>>> mtu
>>>>>>> >>>>>>>>>> 2290
>>>>>>> >>>>>>>>>>         ether 00:19:7e:91:xx:xx
>>>>>>> >>>>>>>>>>         nd6
>>>>>>> options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>>>> >>>>>>>>>>         media: IEEE 802.11 Wireless Ethernet autoselect
>>>>>>> mode 11g
>>>>>>> >>>>>>>>>>         status: associated
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> ifconfig wlan0
>>>>>>> >>>>>>>>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
>>>>>>> >> metric 0
>>>>>>> >>>>>>>>>> mtu
>>>>>>> >>>>>>>>>> 1500
>>>>>>> >>>>>>>>>>         ether 00:19:7e:91:xx:xx
>>>>>>> >>>>>>>>>>         nd6
>>>>>>> options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>>>> >>>>>>>>>>         media: IEEE 802.11 Wireless Ethernet autoselect
>>>>>>> >>>>>>>>>> (autoselect)
>>>>>>> >>>>>>>>>>         status: no carrier
>>>>>>> >>>>>>>>>>         ssid "" channel 5 (2432 MHz 11g)
>>>>>>> >>>>>>>>>>         regdomain 98 indoor ecm authmode WPA privacy ON
>>>>>>> deftxkey
>>>>>>> >>>>>>>>>> UNDEF
>>>>>>> >>>>>>>>>>         txpower 20 bmiss 7 scanvalid 450 bgscan
>>>>>>> bgscanintvl 300
>>>>>>> >>>>>>>>>> bgscanidle
>>>>>>> >>>>>>>>>> 250
>>>>>>> >>>>>>>>>>         roam:rssi 7 roam:rate 5 protmode CTS wme burst
>>>>>>> roaming
>>>>>>> >>>>>>>>>> MANUAL
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> In /var/log/messages I get:
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Jun  8 16:39:16 PC wpa_supplicant[3463]: Trying to
>>>>>>> associate
>>>>>>> >> with
>>>>>>> >>>>>>>>>> 54:e6:fc:ae:xx:xx (SSID='access1' freq=2432 MHz)
>>>>>>> >>>>>>>>>> Jun  8 16:39:20 PC kernel: ath0: device timeout
>>>>>>> >>>>>>>>>> Jun  8 16:39:26 PC wpa_supplicant[3463]: Authentication
>>>>>>> with
>>>>>>> >>>>>>>>>> 54:e6:fc:ae:xx:xx timed out.
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> If I scan for wireless networks I get a list and my ap is
>>>>>>> in the
>>>>>>> >>>>>>>>>> list
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> ifconfig wlan0 scan
>>>>>>> >>>>>>>>>> SSID/MESH ID    BSSID              CHAN RATE   S:N
>>>>>>> INT CAPS
>>>>>>> >>>>>>>>>> net1      00:11:11:01:xx:xx    6   54M -68:-96  100 EP
>>>>>>> >>>>>>>>>> 5edf9c          70:71:bc:26:xx:xx   11   54M -68:-96  100
>>>>>>> EP
>>>>>>> >> WPS
>>>>>>> >>>>>>>>>> WPA
>>>>>>> >>>>>>>>>> WME
>>>>>>> >>>>>>>>>> access1       54:e6:fc:ae:xx:xx    5   54M -66:-96  100
>>>>>>> EP   WPA
>>>>>>> >>>>>>>>>> HTCAP
>>>>>>> >>>>>>>>>> WME
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> In rc.local I have:
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> wlans_ath0="wlan0"
>>>>>>> >>>>>>>>>> ifconfig_wlan0="WPA DHCP"
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> In wpa_supplicant I have:
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant
>>>>>>> >>>>>>>>>> eapol_version=2
>>>>>>> >>>>>>>>>> ap_scan=1
>>>>>>> >>>>>>>>>> fast_reauth=1
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> network={
>>>>>>> >>>>>>>>>>         ssid="access1"
>>>>>>> >>>>>>>>>>         psk="secret1"
>>>>>>> >>>>>>>>>>         priority=5
>>>>>>> >>>>>>>>>> }
>>>>>>> >>>>>>>>>> network={
>>>>>>> >>>>>>>>>>         ssid="access2"
>>>>>>> >>>>>>>>>>         psk="secret2"
>>>>>>> >>>>>>>>>>         priority=5
>>>>>>> >>>>>>>>>> }
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> I searched the net for solution to my problem but I
>>>>>>> couldn't
>>>>>>> >> find
>>>>>>> >>>>>>>>>> one.
>>>>>>> >>>>>>>>>> Can
>>>>>>> >>>>>>>>>> you help me with this?
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Regards,
>>>>>>> >>>>>>>>>>
>>>>>>> >>>>>>>>>> Lyubomir
>>>>>>> >>>>>>>>>> _______________________________________________
>>>>>>> >>>>>>>>>> freebsd-mob...@freebsd.org mailing list
>>>>>>> >>>>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
>>>>>>> >>>>>>>>>> To unsubscribe, send any mail to
>>>>>>> >>>>>>>>>> "freebsd-mobile-unsubscr...@freebsd.org"
>>>>>>> >>>>>>>>
>>>>>>> >>>>>>
>>>>>>> > _______________________________________________
>>>>>>> > freebsd-wireless@freebsd.org mailing list
>>>>>>> > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>>>>> > To unsubscribe, send any mail to "
>>>>>>> freebsd-wireless-unsubscr...@freebsd.org"
>>>>>>> >
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to