Thank you for your advice!
I found a workaround:
# ifconfig wlan0 create wlandev run0
then wait 5 minutes ;-)
and only thereafter:
# ifconfig wlan0 up
run0: <1.0> on usbus1
run0: MAC/BBP RT3593 (rev 0x0402), RF RT3053 (MIMO 3T3R), address
30:85:a9:f4:52:bd
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/1.01, addr 4> on
usbus1
wlan0: Ethernet address: 30:85:a9:f4:52:bd
run0: firmware RT3071 ver. 0.33 loaded
But found another issue: ifconfig wlan0 list scan command does not show
any
results:
root@test:~ # ifconfig wlan0 list scan
root@test:~ #
root@test:~ # wlandebug -i wlan0 scan
net.wlan.0.debug: 0x0 => 0x200000<scan>
wlan0: sta_pick_bss: no scan candidate
wlan0: scan_task: done, restart [ticks 487917, dwell min 20 scanend
2147963261]
wlan0: scan_task: chan 140a -> 1g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 1g -> 6g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 6g -> 11g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 11g -> 7g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 7g -> 52a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 52a -> 56a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 56a -> 60a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 60a -> 64a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 64a -> 36a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 36a -> 40a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 40a -> 44a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 44a -> 48a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 48a -> 2g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 2g -> 3g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 3g -> 4g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 4g -> 5g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 5g -> 8g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 8g -> 9g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 9g -> 10g [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 10g -> 149a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 149a -> 153a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 153a -> 157a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 157a -> 161a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 161a -> 100a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 100a -> 104a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 104a -> 108a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 108a -> 112a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 112a -> 116a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 116a -> 120a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 120a -> 124a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 124a -> 128a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 128a -> 132a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 132a -> 136a [active, dwell min 20ms max 200ms]
wlan0: scan_task: chan 136a -> 140a [active, dwell min 20ms max 200ms]
wlan0: sta_pick_bss: no scan candidate