On Mon, Jul 14, 2014 at 10:37:07PM +0200, John Hay wrote:
> On Mon, Jul 14, 2014 at 01:02:03PM -0700, Adrian Chadd wrote:
> >
> > Ah, you're not even using it in 11n mode. Ok.
> >
> > Well, that's 72 mbufs allocated, and up to 200 more being allocated
> > during transmit. Then there's the handful of pages being used for DMA
> > descriptors. So yeah, over time that may become a problem.
> >
> > Try doubling the number of bounce buffers available and see what happens.
>
> The first boot looks good, all 3 aths came up. Bounce buffers just
> after login:
>
> tst-11-arm:~ # sysctl hw.busdma
> hw.busdma.total_bpages: 128
> hw.busdma.zone0.total_bpages: 128
> hw.busdma.zone0.free_bpages: 128
> hw.busdma.zone0.reserved_bpages: 0
> hw.busdma.zone0.active_bpages: 0
> hw.busdma.zone0.total_bounced: 0
> hw.busdma.zone0.total_deferred: 0
> hw.busdma.zone0.lowaddr: 0x4000fff
> hw.busdma.zone0.alignment: 4096
...
> Great! At last it seems like we are making progress. I'll leave it
> till the morning and then do a few reboots and then some traffic.
>
> One question, should the active bounce pages keep growing or stabilize
> somewhere? How do I know if I have to few or if there is a leak?
>
> Thanks Adrian for your help.
I still ran out sometimes during a reboot, so I upped it to 512 and added
a sysctl to show the max that active_bpages has been. Sometimes just
after a reboot active_bpages is low and other times higher, I have seen
140. A few times during a reboot I see timeouts, which only a reboot
seem to recover from. Can it be a left over config from the previous boot
that does not get cleaned out? Or maybe traffic being received while the
config is happening?
Here is an example during the boot:
####################
...
ath0: <Atheros 9220> irq 28 at device 1.0 on pci0
alloc_bounce_pages: numpages 63
[ath] enabling AN_TOP2_FIXUP
alloc_bounce_pages: numpages 63
alloc_bounce_pages: numpages 63
alloc_bounce_pages: numpages 63
alloc_bounce_pages: numpages 63
alloc_bounce_pages: numpages 63
alloc_bounce_pages: numpages 63
alloc_bounce_pages: numpages 63
alloc_bounce_pages: numpages 8
ath0: AR9220 mac 128.2 RF5133 phy 13.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ath1: <Atheros 9220> irq 27 at device 2.0 on pci0
[ath] enabling AN_TOP2_FIXUP
ath1: AR9220 mac 128.2 RF5133 phy 13.0
ath1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ath2: <Atheros 5413> irq 26 at device 3.0 on pci0
ath2: AR5413 mac 10.5 RF5413 phy 6.1
ath2: 2GHz radio: 0x0000; 5GHz radio: 0x0063
ixpclk0: <IXP4XX Timer> on ixp0
ixpiic0: <IXP4XX GPIO-Based I2C Interface> on ixp0
...
/sbin/ifconfig.bin wlan0 create wlandev ath0 wlanmode adhoc country ZA
wlan0: Ethernet address: 00:21:a4:35:70:42
/sbin/ifconfig.bin wlan0 inet6 ifdisabled
/sbin/ifconfig.bin wlan0 -bgscan channel 140 ssid mesh bssid 02:8c:ca:fe:ca:00
/sbin/ifconfig.bin wlan0 inet6 -ifdisabled
/sbin/ifconfig.bin wlan0 inet6 auto_linklocal
/sbin/ifconfig.bin wlan0 inet6 -ifdisabled
dev.ath.0.debug: 0 -> 8
/sbin/ifconfig.bin wlan0 up
ath0: ath_init: if_flags 0x8803
ath0: ath_stop_locked: invalid 0 if_flags 0x8803
dev.ath.0.debug: 8 -> 0
ath0: hardware error; resetting
ath0: 0x00000000 0x00000020 0x00000000, 0x00000000 0x00000000 0x00000000
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
/sbin/ifconfig.bin wlan0 inet6 fd35:ac5b:b116:10:: prefixlen 64 eui64 alias
/sbin/ifconfig.bin wlan0 inet6 fd35:ac5b:b116:10:: prefixlen 64 alias anycast
/sbin/ifconfig.bin wlan1 create wlandev ath1 wlanmode adhoc country ZA
wlan1: Ethernet address: 00:21:a4:35:6c:96
/sbin/ifconfig.bin wlan1 inet6 ifdisabled
/sbin/ifconfig.bin wlan1 -bgscan channel 136 ssid mesh bssid 02:88:ca:fe:ca:00
/sbin/ifconfig.bin wlan1 inet6 -ifdisabled
/sbin/ifconfig.bin wlan1 inet6 auto_linklocal
/sbin/ifconfig.bin wlan1 inet6 -ifdisabled
dev.ath.1.debug: 0 -> 8
/sbin/ifconfig.bin wlan1 up
ath1: ath_init: if_flags 0x8803
ath1: ath_stop_locked: invalid 0 if_flags 0x8803
R[ 0] (DS.V:0xcd027000 DS.P:0x1227000) L:01227060 D:00089000 *
00000000 00000800 0b802c2c 000000b2
0000175f 00000100 2f808080 00000000 00000000 00000000 00000003
R[ 0] (DS.V:0xcd027060 DS.P:0x1227060) L:012270c0 D:0008a000
00000000 00000800 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000
dev.ath.1.debug: 8 -> 0
/sbin/ifconfig.bin wlan1 inet6 fd35:ac5b:b116:10:: prefixlen 64 eui64 alias
/sbin/ifconfig.bin wlan1 inet6 fd35:ac5b:b116:10:: prefixlen 64 alias anycast
ifa_add_loopback_route: insertion failed: 17
ifconfig.bin: ioctl (SIOCAIFADDR): File exists
/sbin/ifconfig.bin wlan2 create wlandev ath2 wlanmode adhoc country ZA
wlan2: Ethernet address: 00:21:a4:32:38:c2
/sbin/ifconfig.bin wlan2 inet6 ifdisabled
ath0: device timeout
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
/sbin/ifconfig.bin wlan2 -bgscan channel 13 ssid hotspot bssid 02:0d:ca:fe:ca:00
/sbin/ifconfig.bin wlan2 inet6 -ifdisabled
/sbin/ifconfig.bin wlan2 inet6 auto_linklocal
/sbin/ifconfig.bin wlan2 inet6 -ifdisabled
dev.ath.2.debug: 0 -> 8
/sbin/ifconfig.bin wlan2 up
ath2: ath_init: if_flags 0x8803
ath2: ath_stop_locked: invalid 0 if_flags 0x8803
dev.ath.2.debug: 8 -> 0
/sbin/ifconfig.bin wlan2 inet 10.56.244.1/24 alias
/sbin/ifconfig.bin wlan2 inet6 fd35:ac5b:b116:38f4:: prefixlen 64 eui64 alias
/sbin/ifconfig.bin wlan2 inet6 fd35:ac5b:b116:38f4:: prefixlen 64 alias anycast
...
ath0: device timeout
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
...
tst-11-arm:~ # uptime
9:18AM up 2 mins, 1 user, load averages: 1.63, 0.70, 0.28
tst-11-arm:~ # sysctl hw.busdma
hw.busdma.total_bpages: 512
hw.busdma.zone0.total_bpages: 512
hw.busdma.zone0.free_bpages: 375
hw.busdma.zone0.reserved_bpages: 0
hw.busdma.zone0.active_bpages: 137
hw.busdma.zone0.max_active_bpages: 137
hw.busdma.zone0.total_bounced: 1739
hw.busdma.zone0.total_deferred: 0
hw.busdma.zone0.lowaddr: 0x4000fff
hw.busdma.zone0.alignment: 4096
tst-11-arm:~ # ath0: device timeout
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
tst-11-arm:~ # uptime
9:20AM up 4 mins, 1 user, load averages: 0.68, 0.68, 0.34
tst-11-arm:~ # sysctl hw.busdma
hw.busdma.total_bpages: 512
hw.busdma.zone0.total_bpages: 512
hw.busdma.zone0.free_bpages: 326
hw.busdma.zone0.reserved_bpages: 0
hw.busdma.zone0.active_bpages: 186
hw.busdma.zone0.max_active_bpages: 190
hw.busdma.zone0.total_bounced: 6592
hw.busdma.zone0.total_deferred: 0
hw.busdma.zone0.lowaddr: 0x4000fff
hw.busdma.zone0.alignment: 4096
tst-11-arm:~ # ath0: device timeout
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ath0: device timeout
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
####################
The 2 other interfaces did not seem to have a problem and after a reboot
ath0/wlan0 was working fine again.
John
--
John Hay -- j...@meraka.csir.co.za / j...@meraka.org.za
_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
