Hm, what do I use for the username/password field in wpa_supplicant?
-a On 20 May 2015 at 09:29, Johann <[email protected]> wrote: > On 2015/05/16 08:03 AM, Adrian Chadd wrote: >> >> Hi, >> Has this ever worked? > > > Yes. > > I got it working in April 2012 on FreeBSD 8 and 9. I've used a FreeRadius > server and a FreeBSD client with wpa_supplicant to test it. > > At that stage you had to enable the eap_server when you compile hostapd > > # echo HOSTAPD_CFLAGS+=-DEAP_SERVER >> /etc/src.conf > # cd /usr/src/usr.sbin/wpa/hostapd > # make > # make install > > but Bernhard Schmidt fixed it so that EAP_SERVER was enabled by default. > > > Here is the configs that I used: > > rc.conf > hostname="AP-vlan" > wlans_ath0="wlan0" > create_args_wlan0="wlanmode hostap country ZA" > ifconfig_wlan0="146.64.5.5/24 mode 11g channel 6" > defaultrouter="146.64.5.1" > hostapd_enable="YES" > cloned_interfaces="bridge0" > ifconfig_bridge0="addm sis0 addm wlan0 up" > ifconfig_sis0="up" > > > hostapd.conf > interface=wlan0 > ctrl_interface=/var/run/hostapd > ctrl_interface_group=wheel > ssid=testAP > hw_mode=g > channel=6 > > wpa=1 > wpa_pairwise=CCMP TKIP > wpa_key_mgmt=WPA-EAP > wpa_pairwise=TKIP CCMP > rsn_pairwise=CCMP > > Hope it helps > > Regards > Johann > > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "[email protected]" _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "[email protected]"
