Hi, Recompile with ATH_DEBUG, AH_DEBUG, ATH_DIAGAPI
Thanks! -adrian On 4 August 2016 at 00:48, Andrew Stevenson <[email protected]> wrote: > > On 04 Aug 2016, at 00:41, Adrian Chadd <[email protected]> wrote: > >> ok. I'll go dig an ar9227 out of storage and set it up to see what's going >> on. >> >> please do this: >> >> sysctl dev.ath.0.hal.debug=0x18 >> >> then paste me the results from 'dmesg' over some period of time (eg >> between good/bad/good times.) > > OK I enabled this last night and this morning I find that the DHCP server has > stopped serving anything on the WIFI interface. Thats a new one. It might be > a random bugs in the ISC DHCP server but I haven’t noticed it before and I > have seen that rtadvd sometimes doesn’t cope with broken interfaces and > requires a restart after they are fixed so maybe dhcpd is similar. That would > mean the sysctl loop had brought things back by itself. DHCP didn’t log > anything and seemed to be working over wired ethernet. > > I restarted DHCP and everything seems normal. Pings are a bit variable but no > IP layer loss (e.g. best 1.6ms, avg 6.9ms, worst 15.3 ms for a ping from a > client to the base station). > > Nothing logged yet from ath0 other than "ath0: stuck beacon; resetting (bmiss > count 0)” (note 0 this time) logged approx every 4 minutes. Every 5th > (approx) has a bmiss of 4). "ath0: device timeout” appears about once every 2 > hours. > > I will keep checking and let you know. > > Thanks, > > Andrew _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "[email protected]"
