> On 1 Sep 2016, at 13:29, Andriy Voskoboinyk <a...@freebsd.org> wrote:
> Hi everyone,
> rtwn(4), urtwn(4) and urtwm (from previous emails) drivers were merged into a
> single rtwn driver (plus rtwn_usb / rtwn_pci device glue); the code is
> available on https://github.com/s3erios/rtwn repository. Among bugfixes /
> code deduplication, there some new features too:
> 1) multi-vap support (one any wireless interface + one STA interface +
> any number of monitor mode interfaces).
> 2) few new sysctls:
> * dev.rtwn.#.crypto - controls how to use hardware crypto acceleration
> * dev.rtwn.#.ratectl_selected
> * dev.rtwn.#.ratectl - selects current 'rate control' algorithm
> (currently only 'none' and 'net80211' are supported; RTL8192CE needs testing
> with the last).
> 3) (incomplete) power management support for RTL8188EU (requires firmware).
> 4) Short Guard Interval support.
> It's known to work with RTL8188CUS, RTL8188EU and RTL8821AU; however,
> it was never tested with RTL8192CE or RTL8812AU.
> 1) download / checkout the repository.
> 2) apply 'patch-usbdevs.diff' against '/usr/src'
> 3) build and install rtwn module:
> cd $repository/sys/modules/rtwn && make && make install
> 4) build and install rtwn_usb/rtwn_pci:
> cd ../rtwn_usb && make && make install
> cd ../rtwn_pci && make && make install
> 5) unload previous && load current drivers:
> kldunload if_urtwn if_rtwn
> kldload /boot/modules/if_rtwn.ko /boot/modules/if_rtwn_usb.ko
> 6) Use.
I have a Thinkpad T430 with a PCIe RTL8188CE. It fails waying I didn’ t load a
firmware that doesn’ t exist:
rtwn0: <Realtek RTL8188CE> port 0x4000-0x40ff mem 0xf1c00000-0xf1c03fff at
device 0.0 on pci2
rtwn0: r92ce_attach: warning: hardware crypto enabled
rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R
wlan0: Ethernet address: e0:06:e6:c7:54:73
rtwn-rtl8192cfwE_B: could not load firmware image, error 2
rtwn0: failed loadfirmware of file rtwn-rtl8192cfwE_B
I’ve loaded rtwn-rtl8192cfwU_B.ko, never heard of rtwn-rtl8192cfwE_B.ko
email@example.com mailing list
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"