Thank you for the advice! Do you know of any boards that use the AR9280 or
is it recommended to find a supported host board and install an AR9280
mPCIe card into it?
I found the following pages:
This board seems to be supported and can be purchased. However, it only
supports the 2.4 GHz band. Other than that, it seems great:
- Single AR9331 SoC that can run FreeBSD with built-in Wi-Fi.
- GPIO since I hope to control some switches from the board as well.
Do you have experience with this board or do you know of anything similar
that also supports 5 GHz?
On Fri, Sep 8, 2017 at 9:02 AM, Adrian Chadd <adrian.ch...@gmail.com> wrote:
> For now, stick with AR9280 devices. AR9380 and later doesn't work well
> due to chip design :(
> On 7 September 2017 at 20:42, Goo Gle <gsy...@gmail.com> wrote:
> > Hello,
> > I'd like to test some long distance Wi-Fi links (a few kilometers) and
> > heard that FreeBSD has built-in support for TDMA which enables these
> > of links. I'm admittedly new to FreeBSD and would like to know what's a
> > good board/router that's well supported by FreeBSD. Something relatively
> > cheap and supports at least 802.11n (both 2.4 and 5 GHz) would be great!
> > I'm based in USA if it affects availability.
> > Thank you,
> > Alana
> > _______________________________________________
> > email@example.com mailing list
> > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"