Hi Adrian, Oh, I see. I'll look for some Intel based board with mPCIe. Maybe the Minnowboard Turbot, Up Squared or the AMD based PC Engines boards Ruben mentioned (thank you!).
Since I'm still researching, I'd still like to continue searching for a single SoC solution as well. Do you know of any SoCs that're AR9280 based? Thank you! Alana On Fri, Sep 8, 2017 at 12:27 PM, Adrian Chadd <adrian.ch...@gmail.com> wrote: > Hi, > > I recommend experimenting with some intel CPU thing with mini-pcie and > a mini-pcie AR9280. > > AR9331 is AR9380 based, so it won't work righ tnow, sorry! > > > > -a > > > On 8 September 2017 at 10:58, Goo Gle <gsy...@gmail.com> wrote: > > Hi Adrian, > > > > Thank you for the advice! Do you know of any boards that use the AR9280 > or > > is it recommended to find a supported host board and install an AR9280 > mPCIe > > card into it? > > > > I found the following pages: > > https://github.com/freebsd/freebsd-wifi-build/wiki/Carambola2 > > http://shop.8devices.com/wifi4things/carambola2-DVK > > > > This board seems to be supported and can be purchased. However, it only > > supports the 2.4 GHz band. Other than that, it seems great: > > - Single AR9331 SoC that can run FreeBSD with built-in Wi-Fi. > > - GPIO since I hope to control some switches from the board as well. > > > > Do you have experience with this board or do you know of anything similar > > that also supports 5 GHz? > > > > Thank you, > > Alana > > > > > > > > On Fri, Sep 8, 2017 at 9:02 AM, Adrian Chadd <adrian.ch...@gmail.com> > wrote: > >> > >> hi! > >> > >> For now, stick with AR9280 devices. AR9380 and later doesn't work well > >> due to chip design :( > >> > >> > >> > >> -adrian > >> > >> > >> On 7 September 2017 at 20:42, Goo Gle <gsy...@gmail.com> wrote: > >> > Hello, > >> > > >> > I'd like to test some long distance Wi-Fi links (a few kilometers) and > >> > heard that FreeBSD has built-in support for TDMA which enables these > >> > types > >> > of links. I'm admittedly new to FreeBSD and would like to know what's > a > >> > good board/router that's well supported by FreeBSD. Something > relatively > >> > cheap and supports at least 802.11n (both 2.4 and 5 GHz) would be > great! > >> > I'm based in USA if it affects availability. > >> > > >> > Thank you, > >> > Alana > >> > _______________________________________________ > >> > email@example.com mailing list > >> > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > >> > To unsubscribe, send any mail to > >> > "freebsd-wireless-unsubscr...@freebsd.org" > > > > > _______________________________________________ firstname.lastname@example.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"