Ola gente, estou com um problema na hora de instalar o FreeBsd, a msg q estar dando é "In the next men, you will need to set up a DOS-style (fdisk) partitioning scheme for your hard disk. If you simply wish to devote all disk space to FreeBsd (overwriting anything else that might be on the disk(s) selected) then use (A)ll command to select the default partitioning sheme followed by a (Q)uit. If you wish to allocate only free space to FreeBsd, move to a partition marked "unused" and use the (C)reate command. Warning: A geometry of 77622/16/63 for ad0 is incorrect. Using a more likely geometry. If this geometry is incorrecty or you are unsure as to whether or not it's correct, please consult the Hardware Guide in the Documentation submenu or use the (G)eometry command to change it now. Remember: you need to enter whatever your Bios thinks the geometry is! For IDE, it's what you were told in the Bios setup. For SCSI, it's the translation mode your controller is using. Do NOT use a "phusical gemeotry" O HD q estou usando é um Samsung SP0411N LBA 78,242,976 40GB
__________________________________________________ Converse com seus amigos em tempo real com o Yahoo! Messenger http://br.download.yahoo.com/messenger/ _______________________________________________________________ Para enviar um novo email para a lista: freebsd@fug.com.br Sair da Lista: http://mail.fug.com.br/mailman/listinfo/freebsd_fug.com.br Historico: http://www4.fugspbr.org/lista/html/FUG-BR/