On Thu, 2006-03-02 at 12:07 -0300, Celso Viana wrote:
> Tiago,
>
> O Driver xl não suporta essa feature;
Acho que suporta sim, hein!? No manual do polling diz que suporta,
heheheh
> o que o "ifconfig -m xl1" mostra? está utilizando o "autoselect"? tente
> definir os parametros
> "media" e "mediaopt" manualmente e veja se muda alguma coisa....
Servidor "bom":
vendor = '3COM Corp, Networking Division'
device = '3C905C-TX Fast EtherLink for PC Management NIC'
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=9<RXCSUM,VLAN_MTU>
capability list:
=9<RXCSUM,VLAN_MTU>
inet 192.168.0.3 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:01:03:c2:ca:80
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
supported media:
media autoselect
media 100baseTX mediaopt full-duplex
media 100baseTX
media 10baseT/UTP mediaopt full-duplex
media 10baseT/UTP
Servidor "zuado":
vendor = '3COM Corp, Networking Division'
device = '3C905C-TX Fast EtherLink for PC Management NIC'
xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=9<RXCSUM,VLAN_MTU>
capabilities=9<RXCSUM,VLAN_MTU>
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:04:75:7d:96:6d
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
supported media:
media autoselect
media 100baseTX mediaopt full-duplex
media 100baseTX
media 10baseT/UTP mediaopt full-duplex
media 10baseT/UTP
Ou seja: Tudo igualzinho :-/
Os dois eram FreeBSD 5.4 mas no desespero do domingão eu atualizei o
"zuado" para o 6.1 PreRelease... e tentei umas 3 placas 3Com
diferentes...
Que coisa estranha :/
--
Tiago Cruz
http://linuxrapido.org
_______________________________________________
freebsd mailing list
freebsd@fug.com.br
http://lists.fug.com.br/listinfo.cgi/freebsd-fug.com.br
