segue o resultado do dmesg

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:32:43 UTC 2006
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (797.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 134152192 (127 MB)
avail memory = 121724928 (116 MB)
kbd1 at kbdmux0
acpi0: <SOYO AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on
pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 7.3 on
pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.4 (no driver attached)
pci0: <multimedia, audio> at device 7.5 (no driver attached)
pci0: <network, ethernet> at device 11.0 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 710C> SCP,VLINK
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ed1: <Plug & Play Ethernet Card> at port 0x220-0x23f irq 5 on isa0
ed1: Ethernet address: 00:c0:26:a0:5c:21
ed1: type RTL8019 (16 bit)
Timecounter "TSC" frequency 797972010 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38166MB <Seagate ST340014A 3.54> at ata0-master UDMA66
acd0: CDRW <HL-DT-ST GCE-8527B/1.02> at ata0-slave UDMA33
Trying to mount root from ufs:/dev/ad0s3a
pid 308 (ldconfig), uid 0 inumber 41505 on /usr: filesystem full
pid 442 (genkdmconf), uid 0 inumber 161659 on /usr: filesystem full


Citando "Thiago J. Ruiz" <[EMAIL PROTECTED]>:

> Hi,
> Teu kernel é customizado?
>
> Ela aparece no dmesg?
>
> posta seu dmesg pra gente.
>
> []'z
>
> Em 23/10/06, Samuel Querino da Cruz<[EMAIL PROTECTED]> escreveu:
> > Olá Pessoal,
> >
> > não estou conseguindo levantar uma placa Wireless RTL 8180.
> >
> > vejao o resultado do pciconf -lv
> >
> > [EMAIL PROTECTED]:11:0:        class=0x020000 card=0x818010ec 
> > chip=0x818010ec
> rev=0x20
> > hdr=0x00
> >     vendor   = 'Realtek Semiconductor'
> >     device   = 'RTL8180L IEEE 802.11b Wireless MAC and Baseband Processor'
> >     class    = network
> >     subclass = ethernet
> >
> >
> >
>
>
> --
> Thiago J. Ruiz
> http://thiagoruiz.blogspot.com
> -------------------------
> Histórico: http://www.fug.com.br/historico/html/freebsd/
> Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
>

___________________________________________________________________________________
Com o Click21 você tem sempre vantagens! Além do email com 1 Gb, Acelerador, 
Blog,
Flog, Games e atendimento 24 horas, voce também pode falar minutos DDD com a
promoção Click 21 Minutos. Quanto mais você navega mais fala DDD.

-------------------------
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd

Responder a