Em 24/06/2011 09:11, Cleber L. Medina escreveu: > Ola, > > Não se vc ja fez mas tente desabilitar o ACPI. > > Cleber Medina
Opa Cleber, Tentei desabilitar mas aí o sistema trava no meio do boot. Coisa muito esquisita mesmo. Alguma coisa que essa Intel testa em alguns momentos e quando não tem resposta ela simplesmente desliga apitando várias vezes e depois re-liga. E por que só com o FreeBSD? Provavelmente alguma coisa que ela espera uma resposta do SO e quando não tem ela desliga em algum momento. > > Em 24/06/2011 08:48, Marcelo Gondim escreveu: >> Opa Paulo, >> >> Peguei o equipamento ontem e nada. Não consegui resolver ainda. Mesmo >> com o FreeBSD 8.2-STABLE o equipamento se auto desliga randomicamente. >> Abaixo o dmesg dela: >> >> Copyright (c) 1992-2011 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 8.2-STABLE #0: Thu Jun 23 04:13:40 BRT 2011 >> [email protected]:/usr/obj/usr/src/sys/GONDIM amd64 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> CPU: Intel(R) Xeon(R) CPU E5606 @ 2.13GHz (2133.32-MHz >> K8-class CPU) >> Origin = "GenuineIntel" Id = 0x206c2 Family = 6 Model = 2c >> Stepping = 2 >> >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> >> Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI> >> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> >> AMD Features2=0x1<LAHF> >> TSC: P-state invariant >> real memory = 8589934592 (8192 MB) >> avail memory = 8150536192 (7772 MB) >> ACPI APIC Table:<INTEL S5500BC> >> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs >> FreeBSD/SMP: 2 package(s) x 4 core(s) >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 2 >> cpu2 (AP): APIC ID: 18 >> cpu3 (AP): APIC ID: 20 >> cpu4 (AP): APIC ID: 32 >> cpu5 (AP): APIC ID: 34 >> cpu6 (AP): APIC ID: 50 >> cpu7 (AP): APIC ID: 52 >> ioapic0<Version 2.0> irqs 0-23 on motherboard >> ioapic1<Version 2.0> irqs 24-47 on motherboard >> lapic0: Forcing LINT1 to edge trigger >> kbd1 at kbdmux0 >> cryptosoft0:<software crypto> on motherboard >> acpi0:<INTEL S5500BC> on motherboard >> acpi0: [ITHREAD] >> acpi0: Power Button (fixed) >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >> acpi_timer0:<24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >> cpu0:<ACPI CPU> on acpi0 >> cpu1:<ACPI CPU> on acpi0 >> cpu2:<ACPI CPU> on acpi0 >> cpu3:<ACPI CPU> on acpi0 >> cpu4:<ACPI CPU> on acpi0 >> cpu5:<ACPI CPU> on acpi0 >> cpu6:<ACPI CPU> on acpi0 >> cpu7:<ACPI CPU> on acpi0 >> pcib0:<ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0:<ACPI PCI bus> on pcib0 >> pcib1:<ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0 >> pci1:<ACPI PCI bus> on pcib1 >> em0:<Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1000-0x101f mem >> 0xb1a00000-0xb1a1ffff,0xb1900000-0xb19fffff,0xb1a20000-0xb1a23fff irq 28 >> at device 0.0 on pci1 >> em0: Using MSIX interrupts with 3 vectors >> em0: [ITHREAD] >> em0: [ITHREAD] >> em0: [ITHREAD] >> em0: Ethernet address: 00:1e:67:07:9d:cd >> pcib2:<ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0 >> pci2:<ACPI PCI bus> on pcib2 >> pcib3:<ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0 >> pci3:<ACPI PCI bus> on pcib3 >> pcib4:<ACPI PCI-PCI bridge> irq 32 at device 9.0 on pci0 >> pci4:<ACPI PCI bus> on pcib4 >> pci0:<base peripheral, interrupt controller> at device 16.0 (no driver >> attached) >> pci0:<base peripheral, interrupt controller> at device 16.1 (no driver >> attached) >> pci0:<base peripheral, interrupt controller> at device 17.0 (no driver >> attached) >> pci0:<base peripheral, interrupt controller> at device 17.1 (no driver >> attached) >> pci0:<base peripheral, interrupt controller> at device 20.0 (no driver >> attached) >> pci0:<base peripheral, interrupt controller> at device 20.1 (no driver >> attached) >> pci0:<base peripheral, interrupt controller> at device 20.2 (no driver >> attached) >> pci0:<base peripheral, interrupt controller> at device 20.3 (no driver >> attached) >> pci0:<base peripheral> at device 22.0 (no driver attached) >> pci0:<base peripheral> at device 22.1 (no driver attached) >> pci0:<base peripheral> at device 22.2 (no driver attached) >> pci0:<base peripheral> at device 22.3 (no driver attached) >> pci0:<base peripheral> at device 22.4 (no driver attached) >> pci0:<base peripheral> at device 22.5 (no driver attached) >> pci0:<base peripheral> at device 22.6 (no driver attached) >> pci0:<base peripheral> at device 22.7 (no driver attached) >> em1:<Intel(R) PRO/1000 Network Connection 7.2.3> port 0x20e0-0x20ff mem >> 0xb1b00000-0xb1b1ffff,0xb1b43000-0xb1b43fff irq 20 at device 25.0 on pci0 >> em1: Using an MSI interrupt >> em1: [FILTER] >> em1: Ethernet address: 00:1e:67:07:9d:cc >> uhci0:<Intel 82801JI (ICH10) USB controller USB-D> port 0x20c0-0x20df >> irq 19 at device 26.0 on pci0 >> uhci0: [ITHREAD] >> usbus0:<Intel 82801JI (ICH10) USB controller USB-D> on uhci0 >> uhci1:<Intel 82801JI (ICH10) USB controller USB-E> port 0x20a0-0x20bf >> irq 19 at device 26.1 on pci0 >> uhci1: [ITHREAD] >> usbus1:<Intel 82801JI (ICH10) USB controller USB-E> on uhci1 >> uhci2:<Intel 82801JI (ICH10) USB controller USB-F> port 0x2080-0x209f >> irq 19 at device 26.2 on pci0 >> uhci2: [ITHREAD] >> usbus2:<Intel 82801JI (ICH10) USB controller USB-F> on uhci2 >> ehci0:<Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem >> 0xb1b41000-0xb1b413ff irq 19 at device 26.7 on pci0 >> ehci0: [ITHREAD] >> usbus3: EHCI version 1.0 >> usbus3:<Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0 >> pcib5:<ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 >> pci5:<ACPI PCI bus> on pcib5 >> pcib6:<ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 >> pci6:<ACPI PCI bus> on pcib6 >> vgapci0:<VGA-compatible display> mem >> 0xb0000000-0xb0ffffff,0xb1800000-0xb1803fff,0xb1000000-0xb17fffff irq 16 >> at device 0.0 on pci6 >> uhci3:<Intel 82801JI (ICH10) USB controller USB-A> port 0x2060-0x207f >> irq 16 at device 29.0 on pci0 >> uhci3: [ITHREAD] >> usbus4:<Intel 82801JI (ICH10) USB controller USB-A> on uhci3 >> uhci4:<Intel 82801JI (ICH10) USB controller USB-B> port 0x2040-0x205f >> irq 16 at device 29.1 on pci0 >> uhci4: [ITHREAD] >> usbus5:<Intel 82801JI (ICH10) USB controller USB-B> on uhci4 >> uhci5:<Intel 82801JI (ICH10) USB controller USB-C> port 0x2020-0x203f >> irq 16 at device 29.2 on pci0 >> uhci5: [ITHREAD] >> usbus6:<Intel 82801JI (ICH10) USB controller USB-C> on uhci5 >> ehci1:<Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem >> 0xb1b40000-0xb1b403ff irq 16 at device 29.7 on pci0 >> ehci1: [ITHREAD] >> usbus7: EHCI version 1.0 >> usbus7:<Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1 >> pcib7:<ACPI PCI-PCI bridge> at device 30.0 on pci0 >> pci7:<ACPI PCI bus> on pcib7 >> isab0:<PCI-ISA bridge> at device 31.0 on pci0 >> isa0:<ISA bus> on isab0 >> atapci0:<Intel ICH10 SATA300 controller> port >> 0x2158-0x215f,0x216c-0x216f,0x2150-0x2157,0x2168-0x216b,0x2130-0x213f,0x2120-0x212f >> irq 18 at device 31.2 on pci0 >> atapci0: [ITHREAD] >> ata2:<ATA channel 0> on atapci0 >> ata2: [ITHREAD] >> ata3:<ATA channel 1> on atapci0 >> ata3: [ITHREAD] >> pci0:<serial bus, SMBus> at device 31.3 (no driver attached) >> atapci1:<Intel ICH10 SATA300 controller> port >> 0x2148-0x214f,0x2164-0x2167,0x2140-0x2147,0x2160-0x2163,0x2110-0x211f,0x2100-0x210f >> irq 21 at device 31.5 on pci0 >> atapci1: [ITHREAD] >> ata4:<ATA channel 0> on atapci1 >> ata4: [ITHREAD] >> ata5:<ATA channel 1> on atapci1 >> ata5: [ITHREAD] >> acpi_button0:<Sleep Button> on acpi0 >> atrtc0:<AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 >> acpi_hpet0:<High Precision Event Timer> iomem 0xfed00000-0xfed003ff on >> acpi0 >> Timecounter "HPET" frequency 14318180 Hz quality 900 >> qpi0:<QPI system bus> on motherboard >> pcib8:<QPI Host-PCI bridge> pcibus 255 on qpi0 >> pci255:<PCI bus> on pcib8 >> pcib9:<QPI Host-PCI bridge> pcibus 254 on qpi0 >> pci254:<PCI bus> on pcib9 >> orm0:<ISA Option ROMs> at iomem >> 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0 >> atkbd: unable to set the command byte. >> sc0:<System console> at flags 0x100 on isa0 >> sc0: VGA<16 virtual consoles, flags=0x300> >> vga0:<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> atkbdc0:<Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >> atkbd0:<AT Keyboard> irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> atkbd0: [ITHREAD] >> psm0: unable to set the command byte. >> est0:<Enhanced SpeedStep Frequency Control> on cpu0 >> p4tcc0:<CPU Frequency Thermal Control> on cpu0 >> est1:<Enhanced SpeedStep Frequency Control> on cpu1 >> p4tcc1:<CPU Frequency Thermal Control> on cpu1 >> est2:<Enhanced SpeedStep Frequency Control> on cpu2 >> p4tcc2:<CPU Frequency Thermal Control> on cpu2 >> est3:<Enhanced SpeedStep Frequency Control> on cpu3 >> p4tcc3:<CPU Frequency Thermal Control> on cpu3 >> est4:<Enhanced SpeedStep Frequency Control> on cpu4 >> p4tcc4:<CPU Frequency Thermal Control> on cpu4 >> est5:<Enhanced SpeedStep Frequency Control> on cpu5 >> p4tcc5:<CPU Frequency Thermal Control> on cpu5 >> est6:<Enhanced SpeedStep Frequency Control> on cpu6 >> p4tcc6:<CPU Frequency Thermal Control> on cpu6 >> est7:<Enhanced SpeedStep Frequency Control> on cpu7 >> p4tcc7:<CPU Frequency Thermal Control> on cpu7 >> Timecounters tick every 1.000 msec >> IPsec: Initialized Security Association Processing. >> ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based >> forwarding enabled, default to accept, logging disabled >> DUMMYNET 0 with IPv6 initialized (100409) >> load_dn_sched dn_sched FIFO loaded >> load_dn_sched dn_sched PRIO loaded >> load_dn_sched dn_sched QFQ loaded >> load_dn_sched dn_sched RR loaded >> load_dn_sched dn_sched WF2Q+ loaded >> usbus0: 12Mbps Full Speed USB v1.0 >> usbus1: 12Mbps Full Speed USB v1.0 >> usbus2: 12Mbps Full Speed USB v1.0 >> usbus3: 480Mbps High Speed USB v2.0 >> usbus4: 12Mbps Full Speed USB v1.0 >> usbus5: 12Mbps Full Speed USB v1.0 >> usbus6: 12Mbps Full Speed USB v1.0 >> usbus7: 480Mbps High Speed USB v2.0 >> ugen0.1:<Intel> at usbus0 >> uhub0:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 >> ugen1.1:<Intel> at usbus1 >> uhub1:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >> ugen2.1:<Intel> at usbus2 >> uhub2:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 >> ugen3.1:<Intel> at usbus3 >> uhub3:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 >> ugen4.1:<Intel> at usbus4 >> uhub4:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 >> ugen5.1:<Intel> at usbus5 >> uhub5:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 >> ugen6.1:<Intel> at usbus6 >> uhub6:<Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 >> ugen7.1:<Intel> at usbus7 >> uhub7:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 >> ad4: 953869MB<Seagate ST31000528AS CC44> at ata2-master UDMA100 SATA 3Gb/s >> acd0: DVDR<HL-DT-ST DVDRAM GH22NS50/TN03> at ata3-master UDMA100 SATA >> 1.5Gb/s >> lapic20: Forcing LINT1 to edge trigger >> SMP: AP CPU #3 Launched! >> lapic34: Forcing LINT1 to edge trigger >> SMP: AP CPU #5 Launched! >> lapic2: Forcing LINT1 to edge trigger >> SMP: AP CPU #1 Launched! >> lapic52: Forcing LINT1 to edge trigger >> SMP: AP CPU #7 Launched! >> lapic18: Forcing LINT1 to edge trigger >> SMP: AP CPU #2 Launched! >> lapic32: Forcing LINT1 to edge trigger >> SMP: AP CPU #4 Launched! >> lapic50: Forcing LINT1 to edge trigger >> SMP: AP CPU #6 Launched! >> Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 >> usbus0 >> uhub0: 2 ports with 2 removable, self powered >> uhub1: 2 ports with 2 removable, self powered >> uhub2: 2 ports with 2 removable, self powered >> uhub4: 2 ports with 2 removable, self powered >> uhub5: 2 ports with 2 removable, self powered >> uhub6: 2 ports with 2 removable, self powered >> Root mount waiting for: usbus7 usbus3 >> Root mount waiting for: usbus7 usbus3 >> uhub3: 6 ports with 6 removable, self powered >> uhub7: 6 ports with 6 removable, self powered >> Trying to mount root from ufs:/dev/ad4s1a >> WARNING: / was not properly dismounted >> ugen0.2:<CHESEN> at usbus0 >> ukbd0:<CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0 >> kbd2 at ukbd0 >> uhid0:<CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus0 >> ugen2.2:<American Megatrends Inc.> at usbus2 >> ukbd1:<Keyboard Interface> on usbus2 >> kbd3 at ukbd1 >> ums0:<Mouse Interface> on usbus2 >> ums0: 3 buttons and [Z] coordinates ID=0 >> WARNING: /tmp was not properly dismounted >> WARNING: /usr was not properly dismounted >> WARNING: /var was not properly dismounted >> em0: link state changed to UP >> >> Esses warning é porque ela desliga do nada e aí obviamente lá vai um >> fsck e pior que demora pacas porque o disco é de 1Tb. >> >> Em 17/06/2011 17:32, Paulo Henrique - BSDs Brasil escreveu: >>> Tem algum dmesg para poder ver o que a placa-mãe possui. >>> NO site da intel a descrićão é muito resumida, o que diz que ela possui >>> o que de fato o FreeBSD suporta, não sei quanto IPMI2.0. >>> Att. >>> Marcelo Gondim wrote: >>>> Em 17/06/2011 15:21, Paulo Henrique - BSDs Brasil escreveu: >>>> >>>>> Inicia o FreeBSD em modo debug e manda a saida para nós. >>>>> Informaćão quanto ao solucionamento importantissima para a lista. >>>>> >>>>> Att. >>>>> >>>>> >>>> Opa Paulo, >>>> >>>> Vou tentar mas o problema dá randomicamente. O sistema inicia normal, >>>> fica lá no login tranqüilo e do nada desliga e liga. >>>> Mas com certeza descobrindo uma solução estarei postando aqui. O >>>> equipamento está agora em um laboratório no Rio em testes para >>>> descobrirmos o motivo ou pelo menos tentarmos. >>>> >>>> >>>>> Marcelo Gondim wrote: >>>>> >>>>>> Olá pessoal, >>>>>> >>>>>> Comprei um equipamento dual Quad Xeon e esse usa uma motherboard >>>>>> S5500BCR que é dual processada. O que ocorre é o seguinte: >>>>>> >>>>>> Na instalação do FreeBSD 8.2-release a máquina simplesmente desliga dá >>>>>> uns apitos indicando problema e re-inicia novamente sozinha. Consegui >>>>>> com muito custo terminar a instalação do sistema mas não estou >>>>>> conseguindo atualizar para a versão 8.2-stable porque ela sempre >>>>>> re-inicia antes mesmo de eu completar. Sei que muitos vão achar que é >>>>>> um >>>>>> problema no hardware ou elétrica, também achei isso e troquei fonte, >>>>>> memória, processador e até a motherboard e nada resolveu. Testei com >>>>>> outros sistemas como windows 2008 e linux e o problema não ocorre mas >>>>>> com o FreeBSD está acontecendo isso. Alguém faz idéia do que seja? >>>>>> Porque procurei nos logs e não vi nada, dmesg também nada. >>>>>> Estou pensando em tirar o hd, colocar em outro equipamento, atualizar >>>>>> para a 8.2-stable e colocar de volta para ver se acontece o mesmo >>>>>> problema. >>>>>> >>>>>> Alguém passou por esse pepino? >>>>>> >>>>>> []´s >>>>>> >>>>>> Gondim >>>>>> ------------------------- >>>>>> Histórico:http://www.fug.com.br/historico/html/freebsd/ >>>>>> Sair da lista:https://www.fug.com.br/mailman/listinfo/freebsd >>>>>> >>>>>> >>>>> ------------------------- >>>>> Histórico:http://www.fug.com.br/historico/html/freebsd/ >>>>> Sair da lista:https://www.fug.com.br/mailman/listinfo/freebsd >>>>> >>>> ------------------------- >>>> Histórico:http://www.fug.com.br/historico/html/freebsd/ >>>> Sair da lista:https://www.fug.com.br/mailman/listinfo/freebsd >>>> >>> ------------------------- >>> Histórico:http://www.fug.com.br/historico/html/freebsd/ >>> Sair da lista:https://www.fug.com.br/mailman/listinfo/freebsd >> ------------------------- >> Histórico:http://www.fug.com.br/historico/html/freebsd/ >> Sair da lista:https://www.fug.com.br/mailman/listinfo/freebsd > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
