2013/6/25 Sergey Listopad <[email protected]>: > smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.0-STABLE i386] (local build) > Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org > > === START OF INFORMATION SECTION === > Model Family: Hitachi Deskstar 7K160 > Device Model: Hitachi HDS721680PLA380 > Serial Number: PVF704Z12SS6KN > LU WWN Device Id: 5 000cca 324e6faad > Firmware Version: P21OABEA > User Capacity: 80,026,361,856 bytes [80.0 GB] > Sector Size: 512 bytes logical/physical > Device is: In smartctl database [for details use: -P show] > ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 > Local Time is: Tue Jun 25 13:42:11 2013 EEST > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: Disabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test has ever > been run. > Total time to complete Offline > data collection: ( 1445) seconds. > Offline data collection > capabilities: (0x5b) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 1) minutes. > Extended self-test routine > recommended polling time: ( 24) minutes. > SCT capabilities: (0x003f) SCT Status supported. > SCT Error Recovery Control supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED > WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000b 086 086 016 Pre-fail Always > - 131252 > 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline > - 0 > 3 Spin_Up_Time 0x0007 129 129 024 Pre-fail Always > - 155 (Average 154) > 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always > - 68 > 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always > - 102 > 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always > - 0 > 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline > - 0 > 9 Power_On_Hours 0x0012 095 095 000 Old_age Always > - 41836 > 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always > - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always > - 68 > 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always > - 1573 > 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always > - 1573 > 194 Temperature_Celsius 0x0002 187 187 000 Old_age Always > - 32 (Min/Max 16/44) > 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always > - 133 > 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always > - 1 > 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline > - 0 > 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always > - 0 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) > LBA_of_first_error > # 1 Extended offline Completed without error 00% 5882 > - > # 2 Short offline Completed without error 00% 5882 > - > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > > > Наступил конец HDD?
Во-первых, > 9 Power_On_Hours 0x0012 095 095 000 Old_age Always > - 41836 Выбросить винт сразу, 40к часов наработки - слишком много. Во-вторых, > 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always > - 133 > 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always > - 1 Выбросить или разобрать на магнитики. В-третьих, > 1 Raw_Read_Error_Rate 0x000b 086 086 016 Pre-fail Always > - 131252 Для Hitachi это ничего не значит, там показывает хрень. А сама ошибка больше похожа на глючащий контроллер. Но начать с винта.
