2015-12-10 19:57 GMT+02:00 Igor Butsan <[email protected]>: > Привет, > > ipmitool этого не умеет. >
жаль. > но умеет SMCIPMITool > ftp://ftp.supermicro.com/utility/SMCIPMItool/ > Почти 70 МБ и с явой :( > > 2015-12-10 19:42 GMT+02:00 Vladislav V. Prodan <[email protected]>: > >> >> >> 2015-12-10 19:37 GMT+02:00 Eugene V. Boontseff <[email protected]>: >> >>> On 10.12.2015 18:01, Vladislav V. Prodan wrote: >>> >>>> Здравствуйте. >>>> >>>> В веб-режиме есть Modifying IP Access Rules, а вот через ipmitool не >>>> нахожу, как сменить IP... >>>> >>>> Материнская плата от SuperMicro >>>> >>>> вывод ipmitool >>>> # ipmitool >>>> No command provided! >>>> Commands: >>>> raw Send a RAW IPMI request and print response >>>> i2c Send an I2C Master Write-Read command and print >>>> response >>>> spd Print SPD info from remote I2C device >>>> lan Configure LAN Channels >>>> chassis Get chassis status and set power state >>>> power Shortcut to chassis power commands >>>> event Send pre-defined events to MC >>>> mc Management Controller status and global enables >>>> sdr Print Sensor Data Repository entries and readings >>>> sensor Print detailed sensor information >>>> fru Print built-in FRU and scan SDR for FRU locators >>>> gendev Read/Write Device associated with Generic Device >>>> locators sdr >>>> sel Print System Event Log (SEL) >>>> pef Configure Platform Event Filtering (PEF) >>>> sol Configure and connect IPMIv2.0 Serial-over-LAN >>>> tsol Configure and connect with Tyan IPMIv1.5 >>>> Serial-over-LAN >>>> isol Configure IPMIv1.5 Serial-over-LAN >>>> user Configure Management Controller users >>>> channel Configure Management Controller channels >>>> session Print session information >>>> dcmi Data Center Management Interface >>>> sunoem OEM Commands for Sun servers >>>> kontronoem OEM Commands for Kontron devices >>>> picmg Run a PICMG/ATCA extended cmd >>>> fwum Update IPMC using Kontron OEM Firmware Update >>>> Manager >>>> firewall Configure Firmware Firewall >>>> delloem OEM Commands for Dell systems >>>> shell Launch interactive IPMI shell >>>> exec Run list of commands from file >>>> set Set runtime variable for shell and exec >>>> hpm Update HPM components using PICMG HPM.1 file >>>> ekanalyzer run FRU-Ekeying analyzer using FRU files >>>> ime Update Intel Manageability Engine Firmware >>>> >>>> в подразделе lan только сетевые настройки... >>>> >>> А ip-адрес это не сетевые настройки?) >>> >> >> Мне нужно изменить IP в списке доступа (ACL). C каких IP я разрешаю >> коннектиться в IPMI. >> >> >> >>> >>> ipmitool lan print <n> покажет вам сетевые настройки канала, в т.ч. и ip >>> >>> ipmitool lan set - позволит их поменять (в т.ч. и ip) >>> >>> >>> -- >>> Eugene >>> >>> >> >> >> -- >> Vladislav V. Prodan >> System & Network Administrator >> support.od.ua >> > > > > -- > --- > WBR, Igor Butsan > -- Vladislav V. Prodan System & Network Administrator support.od.ua
