Hello, on my system novell dos 7.0 i want to the sb pci 128 soundcard (ensonic 1371). Googling i found some infos and two drivers: The sbinit.com, sbload, sblegacy, sbcfg and for the pci64 apinit.com, apload.exe ...
MY config looks like this: DEVICE=C:\treiber\SCSI\ASPI8DOS.SYS /D DEVICE=C:\nwdos\EMM386.EXE MULTI DPMI=Off FRAME=none include=b000-b7ff video DEVICE=C:\NWDOS\DPMS.EXE DEVICE=C:\NWDOS\SETVER.EXE DOS=HIGH,UMB COUNTRY=49,,C:\NWDOS\COUNTRY.SYS DEVICE=C:\treiber\SCSI\ASPICD.SYS /D:ASPICD0 DEVICE=C:\treiber\cdrom\GSCDROM.SYS /D:MSCD000 /v devicehigh = c:\treiber\scsi\sjiix.sys FILES=61 SHELL=C:\COMMAND.COM C:\ /E:1024 /P BREAK=ON BUFFERS=40 LASTDRIVE = p HISTORY=ON,512,ON My autoexec.bat looks like: @ECHO Off PATH c:\dha;C:\WINDOWS;C:\BAT;C:\NWDOS;C:\WS;C:\DBASE;e:\RECOGN;C:\;D:\MINI;C:\TREIBER\PANEL;C:\JAWS;H:\WORD;C:\COREL\WP62 SET TEMP=c:\TEMP SET NWDOSCFG=C:\NWDOS SET BLASTER=A220 I7 D1 H7 P330 T6 set hal=c:\dha PROMPT $P$G C:\nwdos\shsucDX /C /d:mscd000 /D:ASPICD0 share /l:100 /ml VERIFY OFF KEYB GR+ rem software for screenreader CD \DHA LH HAL -c -DC:\DHA -KLOGO -X93/93 rem software for brailledisplay CD \cb45 combis /C2 combis /u choice /c:jn /t:j,2 combis /C2 cbmenu /b:eurodin cd\ After starting dos i change into c:\sound There i run a batchfile: set BLASTEr=a220 i7 d1 h7 t6 set sbpci=c:\sound sbinit.com sbload The sbinit.com did not come back to the dos-prompt, so that ich must press ctrl-c to break the program. Any ideas what to do? Under linux the soundcard works. Regards. Dietmar ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
