From: Bjorn Andersson <bjorn.anders...@linaro.org>
The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.
Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjora...@quicinc.com>
---
Changes since v2:
- New patch on list
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 244 ++++++++++++++++++++++-
1 file changed, 242 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 2c62ba6a49c5..f35345115c85 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -23,6 +23,90 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ dp2-connector {
+ compatible = "dp-connector";
+ label = "DP2";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp0_phy_out>;
+ };
+ };
+ };
+
+ dp3-connector {
+ compatible = "dp-connector";
+ label = "DP3";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+ port {
+ dp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp1_phy_out>;
+ };
+ };
+ };
+
+ edp0-connector {
+ compatible = "dp-connector";
+ label = "EDP0";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp0_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp2_phy_out>;
+ };
+ };
+ };
+
+ edp1-connector {
+ compatible = "dp-connector";
+ label = "EDP1";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp1_connector_in: endpoint {
+ remote-endpoint = <&mdss0_dp3_phy_out>;
+ };
+ };
+ };
+
+ edp2-connector {
+ compatible = "dp-connector";
+ label = "EDP2";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp2_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp2_phy_out>;
+ };
+ };
+ };
+
+ edp3-connector {
+ compatible = "dp-connector";
+ label = "EDP3";
+ type = "mini";
+
+ hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+ port {
+ edp3_connector_in: endpoint {
+ remote-endpoint = <&mdss1_dp3_phy_out>;
+ };
+ };
+ };
};
&apps_rsc {
@@ -156,13 +240,169 @@ vreg_l7g: ldo7 {
vreg_l8g: ldo8 {
regulator-name = "vreg_l8g";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l11g: ldo11 {
+ regulator-name = "vreg_l11g";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
+&dispcc0 {
+ status = "okay";
+};
+
+&dispcc1 {
+ status = "okay";
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp2 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp2_phy_out: endpoint {
+ remote-endpoint = <&edp0_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss0_dp3 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss0_dp3_phy_out: endpoint {
+ remote-endpoint = <&edp1_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss0_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1 {
+ status = "okay";
+};
+
+&mdss1_dp0 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp0_phy_out: endpoint {
+ remote-endpoint = <&dp2_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp1 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp1_phy_out: endpoint {
+ remote-endpoint = <&dp3_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp1_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp2 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp2_phy_out: endpoint {
+ remote-endpoint = <&edp2_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp3 {
+ status = "okay";
+
+ data-lanes = <0 1 2 3>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss1_dp3_phy_out: endpoint {
+ remote-endpoint = <&edp3_connector_in>;
+ };
+ };
+ };
+};
+
+&mdss1_dp3_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l11g>;
+ vdda-pll-supply = <&vreg_l3g>;
+};
+
&qup2 {
status = "okay";
};
--
2.37.3
