I tried increasing the nsslapd-dbcachesize and nsslapd-cachememsize in
my QA envs to 200MB.
However, in my log files, I still see this message
[29/Aug/2016:04:34:37 +0000] - WARNING: ipaca: entry cache size
10485760B is less than db size 11599872B; We recommend to increase the
entry cache size nsslapd-cachememsize.
[29/Aug/2016:04:34:37 +0000] - WARNING: changelog: entry cache size
2097152B is less than db size 441647104B; We recommend to increase the
entry cache size nsslapd-cachememsize.
these are my ldif files that i used to modify the values
modify entry cache size
cat modify-cache-mem-size.ldif
dn: cn=userRoot,cn=ldbm database,cn=plugins,cn=config
changetype: modify
replace: nsslapd-cachememsize
nsslapd-cachememsize: 209715200
modify db cache size
cat modfy-db-cache-size.ldif
dn: cn=config,cn=ldbm database,cn=plugins,cn=config
changetype: modify
replace: nsslapd-dbcachesize
nsslapd-dbcachesize: 209715200
After modifying , i restarted IPA services
Is there anything else that I need to take care of as the logs
suggest its still not getting the updated values
Thanks
Rakesh
On Mon, Aug 29, 2016 at 6:07 PM, Rakesh Rajasekharan
<rakesh.rajasekha...@gmail.com <mailto:rakesh.rajasekha...@gmail.com>>
wrote:
Hi Thierry,
Coz of the issues we had to revert back to earlier running
openldap in production.
I have now done a few TCP related changes in sysctl.conf and have
also increased the nsslapd-dbcachesize and nsslapd-cachememsize to
200MB
I will again start migrating hosts back to IPA and see if I face
the earlier issue.
I will update back once I have something
Thanks,
Rakesh
On Thu, Aug 25, 2016 at 2:17 PM, thierry bordaz
<tbor...@redhat.com <mailto:tbor...@redhat.com>> wrote:
On 08/25/2016 10:15 AM, Rakesh Rajasekharan wrote:
All of the troubleshooting seems fine.
However, Running libconv.pl <http://libconv.pl> gives me this
output
----- Recommendations -----
1. You have unindexed components, this can be caused from a
search on an unindexed attribute, or your returned results
exceeded the allidsthreshold. Unindexed components are not
recommended. To refuse unindexed searches, switch
'nsslapd-require-index' to 'on' under your database entry
(e.g. cn=UserRoot,cn=ldbm database,cn=plugins,cn=config).
2. You have a significant difference between binds and
unbinds. You may want to investigate this difference.
I feel, this could be a pointer to things going slow.. and
IPA hanging. I think i now have something that I can try and
nail down this issue.
On a sidenote, I was earlier running openldap and migrated
over to Freeipa,
Thanks
Rakesh
On Wed, Aug 24, 2016 at 12:38 PM, Petr Spacek
<pspa...@redhat.com <mailto:pspa...@redhat.com>> wrote:
On 23.8.2016 18:44, Rakesh Rajasekharan wrote:
> I think thers something seriously wrong with my system
>
> not able to run any IPA commands
>
> klist
> Ticket cache: KEYRING:persistent:0:0
> Default principal: ad...@xyz.com <mailto:ad...@xyz.com>
>
> Valid starting Expires Service principal
> 2016-08-23T16:26:36 2016-08-24T16:26:22
krbtgt/xyz....@xyz.com <mailto:xyz....@xyz.com>
>
>
> [root@prod-ipa-master-1a :~] ipactl status
> Directory Service: RUNNING
> krb5kdc Service: RUNNING
> kadmin Service: RUNNING
> ipa_memcached Service: RUNNING
> httpd Service: RUNNING
> pki-tomcatd Service: RUNNING
> ipa-otpd Service: RUNNING
> ipa: INFO: The ipactl command was successful
>
>
>
> [root@prod-ipa-master :~] ipa user-find p-testuser
> ipa: ERROR: Kerberos error: ('Unspecified GSS failure.
Minor code may
> provide more information', 851968)/("Cannot contact any
KDC for realm '
> XYZ.COM <http://XYZ.COM>'", -1765328228)
Hi Rakesh,
Having a reproducible test case would you rerun the
command above.
During its processing you may monitor DS process load
(top). If it is high, you may get some pstacks of it.
Also would you attach the part of DS access logs taken
during the command.
regards
thierry
>
This is weird because the server seems to be up.
Please follow
http://www.freeipa.org/page/Troubleshooting#Authentication.2FKerberos
<http://www.freeipa.org/page/Troubleshooting#Authentication.2FKerberos>
Petr^2 Spacek
>
>
> Thanks
>
> Rakesh
>
> On Tue, Aug 23, 2016 at 10:01 PM, Rakesh Rajasekharan <
> rakesh.rajasekha...@gmail.com
<mailto:rakesh.rajasekha...@gmail.com>> wrote:
>
>> i changed the loggin level to 4 . Modifying
nsslapd-accesslog-level
>>
>> But, the hang is still there. though I dont see the
sigfault now
>>
>>
>>
>>
>> On Tue, Aug 23, 2016 at 9:02 PM, Rakesh Rajasekharan <
>> rakesh.rajasekha...@gmail.com
<mailto:rakesh.rajasekha...@gmail.com>> wrote:
>>
>>> My disk was getting filled too fast
>>>
>>> logs under /var/log/dirsrv was coming around 5 gb
quickly filling up
>>>
>>> Is there a way to make the logging less verbose
>>>
>>>
>>>
>>> On Tue, Aug 23, 2016 at 6:41 PM, Petr Spacek
<pspa...@redhat.com <mailto:pspa...@redhat.com>> wrote:
>>>
>>>> On 23.8.2016 15:07, Rakesh Rajasekharan wrote:
>>>>> I was able to fix that may be temporarily... when i
checked the
>>>> network..
>>>>> there was another process that was running and
consuming a lot of
>>>> network (
>>>>> i have no idea who did that. I need to seriously
start restricting
>>>> people
>>>>> access to this machine )
>>>>>
>>>>> after killing that perfomance improved drastically
>>>>>
>>>>> But now, suddenly I started experiencing the same hang.
>>>>>
>>>>> This time , I gert the following error when checked
dmesg
>>>>>
>>>>> [ 301.236976] ns-slapd[3124]: segfault at 0 ip
00007f1de416951c sp
>>>>> 00007f1dee1dba70 error 4 in
libcos-plugin.so[7f1de4166000+b000]
>>>>> [ 1116.248431] TCP: request_sock_TCP: Possible SYN
flooding on port 88.
>>>>> Sending cookies. Check SNMP counters.
>>>>> [11831.397037] ns-slapd[22550]: segfault at 0 ip
00007f533d82251c sp
>>>>> 00007f5347894a70 error 4 in
libcos-plugin.so[7f533d81f000+b000]
>>>>> [11832.727989] ns-slapd[22606]: segfault at 0 ip
00007f6231eb951c sp
>>>>> 00007f623bf2ba70 error 4 in
libcos-plugin.so[7f6231eb6000+b00
>>>>
>>>> Okay, this one is serious. The LDAP server crashed.
>>>>
>>>> 1. Make sure all your packages are up-to-date.
>>>>
>>>> Please see
>>>>
http://directory.fedoraproject.org/docs/389ds/FAQ/faq.html#d
<http://directory.fedoraproject.org/docs/389ds/FAQ/faq.html#d>
>>>> ebugging-crashes
>>>> for further instructions how to debug this.
>>>>
>>>> Petr^2 Spacek
>>>>
>>>>>
>>>>> and in /var/log/dirsrv/example-com/errors
>>>>>
>>>>> [23/Aug/2016:12:49:36 +0000] DSRetroclPlugin -
delete_changerecord:
>>>> could
>>>>> not delete change record 3291138 (rc: 32)
>>>>> [23/Aug/2016:12:49:36 +0000] DSRetroclPlugin -
delete_changerecord:
>>>> could
>>>>> not delete change record 3291139 (rc: 32)
>>>>> [23/Aug/2016:12:49:36 +0000] DSRetroclPlugin -
delete_changerecord:
>>>> could
>>>>> not delete change record 3291140 (rc: 32)
>>>>> [23/Aug/2016:12:49:36 +0000] DSRetroclPlugin -
delete_changerecord:
>>>> could
>>>>> not delete change record 3291141 (rc: 32)
>>>>> [23/Aug/2016:12:49:36 +0000] DSRetroclPlugin -
delete_changerecord:
>>>> could
>>>>> not delete change record 3291142 (rc: 32)
>>>>> [23/Aug/2016:12:49:36 +0000] DSRetroclPlugin -
delete_changerecord:
>>>> could
>>>>> not delete change record 3291143 (rc: 32)
>>>>> [23/Aug/2016:12:49:36 +0000] DSRetroclPlugin -
delete_changerecord:
>>>> could
>>>>> not delete change record 3291144 (rc: 32)
>>>>> [23/Aug/2016:12:49:36 +0000] DSRetroclPlugin -
delete_changerecord:
>>>> could
>>>>> not delete change record 3291145 (rc: 32)
>>>>> [23/Aug/2016:12:49:50 +0000] - Retry count exceeded
in delete
>>>>> [23/Aug/2016:12:49:50 +0000] DSRetroclPlugin -
delete_changerecord:
>>>> could
>>>>> not delete change record 3292734 (rc: 51)
>>>>>
>>>>>
>>>>> Can i do something about this error.. I treid to
restart ipa a couple
>>>> of
>>>>> time but that did not help
>>>>>
>>>>> Thanks
>>>>> Rakesh
>>>>>
>>>>> On Mon, Aug 22, 2016 at 2:27 PM, Petr Spacek
<pspa...@redhat.com <mailto:pspa...@redhat.com>>
>>>> wrote:
>>>>>
>>>>>> On 19.8.2016 19:32, Rakesh Rajasekharan wrote:
>>>>>>> I am running my set up on AWS cloud, and entropy
is low at around
>>>> 180 .
>>>>>>>
>>>>>>> I plan to increase it bu installing haveged .
But, would low entropy
>>>> by
>>>>>> any
>>>>>>> chance cause this issue of intermittent hang .
>>>>>>> Also, the hang is mostly observed when
registering around 20 clients
>>>>>>> together
>>>>>>
>>>>>> Possibly, I'm not sure. If you want to dig into
this, I would do this:
>>>>>> 1. look what process hangs on client (using pstree
command or so)
>>>>>> $ pstree
>>>>>>
>>>>>> 2. look to what server and port is the hanging
client connected to
>>>>>> $ lsof -p <PID of the hanging process>
>>>>>>
>>>>>> 3. jump to server and see what process is bound to
the target port
>>>>>> $ netstat -pn
>>>>>>
>>>>>> 4. see where the process if hanging
>>>>>> $ strace -p <PID of the hanging process>
>>>>>>
>>>>>> I hope it helps.
>>>>>>
>>>>>> Petr^2 Spacek
>>>>>>
>>>>>>> On Fri, Aug 19, 2016 at 7:24 PM, Rakesh
Rajasekharan <
>>>>>>> rakesh.rajasekha...@gmail.com
<mailto:rakesh.rajasekha...@gmail.com>> wrote:
>>>>>>>
>>>>>>>> yes there seems to be something thats worrying..
I have faced this
>>>> today
>>>>>>>> as well.
>>>>>>>> There are few hosts around 280 odd left and when
i try adding them
>>>> to
>>>>>> IPA
>>>>>>>> , the slowness begins..
>>>>>>>>
>>>>>>>> all the ipa commands like ipa user-find.. etc
becomes very slow in
>>>>>>>> responding.
>>>>>>>>
>>>>>>>> the SYNC_RECV are not many though just around
80-90 and today that
>>>> was
>>>>>>>> around 20 only
>>>>>>>>
>>>>>>>>
>>>>>>>> I have for now increased tcp_max_syn_backlog to
5000.
>>>>>>>> For now the slowness seems to have gone.. but I
will do a try
>>>> adding the
>>>>>>>> clients again tomorrow and see how it goes
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>> Rakesh
>>>>>>>>
>>>>>>>> The issues
>>>>>>>>
>>>>>>>> On Fri, Aug 19, 2016 at 12:58 PM, Petr Spacek
<pspa...@redhat.com <mailto:pspa...@redhat.com>>
>>>>>> wrote:
>>>>>>>>
>>>>>>>>> On 18.8.2016 17:23, Rakesh Rajasekharan wrote:
>>>>>>>>>> Hi
>>>>>>>>>>
>>>>>>>>>> I am migrating to freeipa from openldap and
have around 4000
>>>> clients
>>>>>>>>>>
>>>>>>>>>> I had openned a another thread on that, but
chose to start a new
>>>> one
>>>>>>>>> here
>>>>>>>>>> as its a separate issue
>>>>>>>>>>
>>>>>>>>>> I was able to change the
nssslapd-maxdescriptors adding an ldif
>>>> file
>>>>>>>>>>
>>>>>>>>>> cat nsslapd-modify.ldif
>>>>>>>>>> dn: cn=config
>>>>>>>>>> changetype: modify
>>>>>>>>>> replace: nsslapd-maxdescriptors
>>>>>>>>>> nsslapd-maxdescriptors: 17000
>>>>>>>>>>
>>>>>>>>>> and running the ldapmodify command
>>>>>>>>>>
>>>>>>>>>> I have now started moving clients running an
openldap to Freeipa
>>>> and
>>>>>>>>> have
>>>>>>>>>> today moved close to 2000 clients
>>>>>>>>>>
>>>>>>>>>> However, I have noticed that IPA hangs
intermittently.
>>>>>>>>>>
>>>>>>>>>> running a kinit admin returns the below error
>>>>>>>>>> kinit: Generic error (see e-text) while
getting initial
>>>> credentials
>>>>>>>>>>
>>>>>>>>>> from the /var/log/messages, I see this entry
>>>>>>>>>>
>>>>>>>>>> prod-ipa-master-int kernel: [104090.315801] TCP:
>>>> request_sock_TCP:
>>>>>>>>>> Possible SYN flooding on port 88. Sending
cookies. Check SNMP
>>>>>> counters.
>>>>>>>>>
>>>>>>>>> I would be worried about this message. Maybe
kernel/firewall is
>>>> doing
>>>>>>>>> something fishy behind your back and blocking
some connections or
>>>> so.
>>>>>>>>>
>>>>>>>>> Petr^2 Spacek
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Aug 18 13:00:01 prod-ipa-master-int
systemd[1]: Started Session
>>>> 4885
>>>>>> of
>>>>>>>>>> user root.
>>>>>>>>>> Aug 18 13:00:01 prod-ipa-master-int
systemd[1]: Starting Session
>>>> 4885
>>>>>> of
>>>>>>>>>> user root.
>>>>>>>>>> Aug 18 13:01:01 prod-ipa-master-int
systemd[1]: Started Session
>>>> 4886
>>>>>> of
>>>>>>>>>> user root.
>>>>>>>>>> Aug 18 13:01:01 prod-ipa-master-int
systemd[1]: Starting Session
>>>> 4886
>>>>>> of
>>>>>>>>>> user root.
>>>>>>>>>> Aug 18 13:02:40 prod-ipa-master-int
python[28984]: ansible-command
>>>>>>>>> Invoked
>>>>>>>>>> with creates=None executable=None shell=True
args= removes=None
>>>>>>>>> warn=True
>>>>>>>>>> chdir=None
>>>>>>>>>> Aug 18 13:04:37 prod-ipa-master-int sssd_be:
GSSAPI Error:
>>>> Unspecified
>>>>>>>>> GSS
>>>>>>>>>> failure. Minor code may provide more
information (KDC returned
>>>> error
>>>>>>>>>> string: PROCESS_TGS)
>>>>>>>>>>
>>>>>>>>>> Could it be possible that its due to the
initial load of adding
>>>> the
>>>>>>>>> clients
>>>>>>>>>> or is there something else that I need to take
care of.
