Hi Werner, Can you show me the output of ipmi-sensors? This product ID and manufacturer ID are already handled (I'll document the additional motheboard though). Perhaps there is a new OEM sensor that I'm unaware of.
Or did the user remember to use --interpret-oem-data? Al On Mon, 2011-02-14 at 07:50 -0800, Werner Fischer wrote: > Hi again, > > the customer just sent me also bmc-info of another system with > X8DT3-LN4F board - see > http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3-LN4F.cfm > > The X8DT3-LN4F also lacks output for CPU temperatures. Here is its > bmc-info: > > Device ID : 32 > Device Revision : 1 > Device SDRs : unsupported > Firmware Revision : 2.03 > Device Available : yes (normal operation) > IPMI Version : 2.0 > Sensor Device : supported > SDR Repository Device : supported > SEL Device : supported > FRU Inventory Device : supported > IPMB Event Receiver : supported > IPMB Event Generator : supported > Bridge : unsupported > Chassis Device : supported > Manufacturer ID : Super Micro Computer Inc. (47488) > Product ID : 43707 > Auxiliary Firmware Revision Information : 00000001h > > GUID : 00000000-0000-0000-0000-000000434D53 > > System Firmware Version : rsion1.0 > System Name : Manager > Primary Operating System Name : SE Server 1.0 > Operating System Name : > > Channel Information > > Channel Number : 0 > Medium Type : IPMB (I2C) > Protocol Type : IPMB-1.0 > Active Session Count : 0 > Session Support : session-less > Vendor ID : Intelligent Platform Management Interface forum (7154) > > Channel Number : 1 > Medium Type : 802.3 LAN > Protocol Type : IPMB-1.0 > Active Session Count : 1 > Session Support : multi-session > Vendor ID : Intelligent Platform Management Interface forum (7154) > > best regards, > Werner > > On Mon, 2011-02-14 at 11:33 +0100, Werner Fischer wrote: > > Hi Al, > > > > * one of our customers discovered another Supermicro system where > > FreeIPMI has currently no product ID information to display the > > OEM CPU temp sensors (he tried up to > > freeipmi-1.0.2.beta2.tar.gz) > > * It is a 6015B-3R > > http://www.supermicro.com/products/system/1U/6015/SYS-6015B-3R.cfm > > with a X7DBR-3 mainboard > > http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBR-3.cfm > > Below I have attached his output of bmc-info. > > > > My questions > > 1. Can you add the Manufacturer-ID/Product-ID for the OEM CPU temp > > sensors for this board? (As it is a X7-board it has IPMI not > > onboard (like the X8-boards do), but it uses the AOC-SIMSO(+) > > add on card for IPMI. Therefore the Manufacturer ID is Peppercon > > (not Supermicro).) > > 2. If it is not too difficult for me and if it could lower your > > necessary work: Maybe you can tell me where the > > Manufacturer-ID/Product-ID are matched in the FreeIPMI code for > > the OEM sensors (so I could try add them myself in the source > > and I could send you directly patches) > > > > Thanks for your help and best regards, > > Werner > > > > PS: Here is the output of bmc-info: > > > > Device ID : 34 > > Device Revision : 1 > > Device SDRs : unsupported > > Firmware Revision : 1.59 > > Device Available : yes (normal operation) > > IPMI Version : 2.0 > > Sensor Device : supported > > SDR Repository Device : supported > > SEL Device : supported > > FRU Inventory Device : supported > > IPMB Event Receiver : unsupported > > IPMB Event Generator : unsupported > > Bridge : unsupported > > Chassis Device : supported > > Manufacturer ID : Peppercon AG (10437) > > Product ID : 4 > > Auxiliary Firmware Revision Information : 20540000h > > > > GUID : 0F0E0D0C-0B0A-0908-BD20-9BFEFF483002 > > > > Channel Information > > > > Channel Number : 1 > > Medium Type : 802.3 LAN > > Protocol Type : IPMB-1.0 > > Active Session Count : 1 > > Session Support : multi-session > > Vendor ID : Intelligent Platform Management Interface forum > > (7154) > > > > Channel Number : 5 > > Medium Type : Asynch. Serial/Modem (RS-232) > > Protocol Type : IPMB-1.0 > > Active Session Count : 0 > > Session Support : single-session > > Vendor ID : Intelligent Platform Management Interface forum > > (7154) > > > > > > > > _______________________________________________ > Freeipmi-devel mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/freeipmi-devel -- Albert Chu [email protected] Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-devel mailing list [email protected] http://lists.gnu.org/mailman/listinfo/freeipmi-devel
