Hey Dmitry, > > ipmiconsole_engine.c:276:2: #error Additional threadsafe gethostbyname > > support > > needed > > gmake[4]: *** [libipmiconsole_la-ipmiconsole_engine.lo] Error 1
I know of the problem here. The 'gethostbyname_r' routine is not standard, so different OSes define it differently. All I need is the FreeBSD version of gethostbyname_r and all will be good. Al > Please try to build from this port skeleton: > > http://kaya.nov.net/tmp/freeipmi-0.3.0-port.tar.gz > > It fixes ipmiconsole compilation. I've not seen ipmiping and rmcpping > failings You have, so please report if it's still failing. > > > > > FreeIPMI installed successfully without ipmiping, rmcpping and ipmiconsole > > :) > > %ipmi-locate # works fine > > > > Probing KCS device using DMIDECODE... done > > IPMI Version: 1.5 > > IPMI locate driver: DMIDECODE > > IPMI interface: KCS > > BMC driver device: > > BMC I/O base address: CA8 > > Register space: 4 > > > > Probing SMIC device using DMIDECODE... FAILED > > > > Probing BT device using DMIDECODE... FAILED > > > > Probing SSIF device using DMIDECODE... FAILED > > > > Probing KCS device using SMBIOS... FAILED > > > > Probing SMIC device using SMBIOS... FAILED > > ... > > > > %bmc-info #works fine > > Device ID: 20 > > Device Revision: 0 > > Firmware Revision: 1.17 > > [Device Available (normal operation)] > > IPMI Version: 1.5 > > Additional Device Support: > > [Sensor Device] > > [SDR Repository Device] > > [SEL Device] > > [IPMB Event Receiver] > > [IPMB Event Generator] > > [Chassis Device] > > Manufacturer ID: 2h > > Product ID: 4h > > Aux Firmware Revision Info: 54425041h > > Channel Information: > > Channel No: 0 > > Medium Type: IPMB (I2C) > > Protocol Type: IPMB-1.0 > > Channel No: 1 > > Medium Type: 802.3 LAN > > Protocol Type: IPMB-1.0 > > Channel No: 2 > > Medium Type: Asynch. Serial/Modem (RS-232) > > Protocol Type: IPMB-1.0 > > Channel No: 3 > > Medium Type: System Interface (KCS, SMIC, or BT) > > Protocol Type: IPMB-1.0 > > > > But IPMI-SENSORS FAILS > > % ipmi-sensors > > ipmi-sensors: sdr cache directory setup failed #SDR CACHE SETUP FAILED > > > > %ipmi-sel #sdr cache problem > > ipmi-sel: sdr cache initialization failed > > The above port skeleton also have a patch for this. > To developers: it seems that this bug is only arises on FreeBSD. > > > > > I am using IBM X series 336 machine to test sensors. > > wbr&w, dmitry. -- Albert Chu [EMAIL PROTECTED] 925-422-5311 Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-users
