Hey Won, > One thing left is how i can into the SEL. I tried this with other tools. None > of them gave an output. :(
Do you mean you can't access the SEL in multiple IPMI software? Can you send me the --debug output from running ipmi-sel? Let's see what the problem is. Al On Fri, 2009-04-03 at 11:57 -0700, Won De Erick wrote: > --- On Fri, 4/3/09, Al Chu <ch...@llnl.gov> wrote: > > Hey Won, > > > > The reason for what you're seeing is described in the > > ipmimonitoring > > manpage. > > > > --- > > Interpretation rules have not been written for all sensors > > permutations > > and types. Users may notice some sensors output in > > ipmi-sensors(8) do > > not output in ipmimonitoring. If sensor interpretation > > rules are needed, > > please contact the FreeIPMI maintainers. > > --- > > > > Looking at your sensors output below, there are three OEM > > sensors that I > > can't interpret b/c I don't know the interpretation rules > > for them. The > > Power Unit Device Install and Fan transition > > interpretations were > > recently added in 0.7.3. So if you update to atleast > > 0.7.3, those > > readings should show up in ipmimonitoring. > > > > As for why Temperature Sensors aren't showing up, this > > corner case for > > HP machines also appears to have been fixed in 0.7..3. > > Thank you for the tip. I installed the latest, 0.7.6, instead. > > hpdl380-fbsd71r# ipmi-sensors > 1: UID Light (OEM Reserved): [OEM State = 0000h] > 2: Int. Health LED (OEM Reserved): [OEM State = 0000h] > 3: Ext. Health LED (OEM Reserved): [OEM State = 0000h] > 4: Power Supply 1 (Power Supply): [Presence detected] > 5: Power Supply 2 (Power Supply): [NA] > 6: Power Supplies (Power Supply): [Non-redundant:Sufficient Resources from > Redun dant] > 8: VRM 1 (Power Unit): [Device Inserted/Device Present] > 9: VRM 2 (Power Unit): [Device Inserted/Device Present] > 10: Fan 1 (Fan): [transition to Running] > 11: Fan 2 (Fan): [transition to Running] > 12: Fan 3 (Fan): [transition to Running] > 13: Fan 4 (Fan): [transition to Running] > 14: Fan 5 (Fan): [transition to Running] > 15: Fan 6 (Fan): [transition to Running] > 16: Fans (Fan): [Fully Redundant] > 18: Temp 1 (Temperature): 35.00 C (NA/70.00): [OK] > 19: Temp 2 (Temperature): 17.00 C (NA/39.00): [OK] > 20: Temp 3 (Temperature): 30.00 C (NA/127.00): [OK] > 21: Temp 4 (Temperature): 30.00 C (NA/127.00): [OK] > 22: Temp 5 (Temperature): 46.00 C (NA/77.00): [OK] > 23: Temp 6 (Temperature): 30.00 C (NA/127.00): [OK] > 24: Temp 7 (Temperature): 30.00 C (NA/127.00): [OK] > 25: Power Meter (Current): [Device Enabled] > > > hpdl380-fbsd71r# ipmimonitoring > Record_ID | Sensor Name | Sensor Group | Monitoring Status| Sensor Units | > Sensor Reading > 4 | Power Supply 1 | Power Supply | Nominal | N/A | 'Presence detected' > 6 | Power Supplies | Power Supply | Critical | N/A | > 'Non-redundant:Sufficient Resources from Redu ndant' > 8 | VRM 1 | Power Unit | Nominal | N/A | 'Device Inserted/Device Present' > 9 | VRM 2 | Power Unit | Nominal | N/A | 'Device Inserted/Device Present' > 10 | Fan 1 | Fan | Nominal | N/A | 'transition to Running' > 11 | Fan 2 | Fan | Nominal | N/A | 'transition to Running' > 12 | Fan 3 | Fan | Nominal | N/A | 'transition to Running' > 13 | Fan 4 | Fan | Nominal | N/A | 'transition to Running' > 14 | Fan 5 | Fan | Nominal | N/A | 'transition to Running' > 15 | Fan 6 | Fan | Nominal | N/A | 'transition to Running' > 16 | Fans | Fan | Nominal | N/A | 'Fully Redundant' > 18 | Temp 1 | Temperature | Nominal | C | 35.000000 > 19 | Temp 2 | Temperature | Nominal | C | 17.000000 > 20 | Temp 3 | Temperature | Nominal | C | 30.000000 > 21 | Temp 4 | Temperature | Nominal | C | 30.000000 > 22 | Temp 5 | Temperature | Nominal | C | 46.000000 > 23 | Temp 6 | Temperature | Nominal | C | 30.000000 > 24 | Temp 7 | Temperature | Nominal | C | 30.000000 > hpdl380-fbsd71r# > > One thing left is how i can into the SEL. I tried this with other tools. None > of them gave an output. :( > > The box is IPMI v2.0-compliant. I can see a lot of logs using iLO. > > Thanks, > > Won > > > > > > -- Albert Chu ch...@llnl.gov Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-users mailing list Freeipmi-users@gnu.org http://lists.gnu.org/mailman/listinfo/freeipmi-users
