Hi All,
sending the debug output.
Thanks,
Won
--- On Fri, 4/3/09, Al Chu <ch...@llnl.gov> wrote:
> Hey Won,
>
> > One thing left is how i can into the SEL. I tried this
> with other tools. None of them gave an output. :(
>
> Do you mean you can't access the SEL in multiple IPMI
> software?
>
> Can you send me the --debug output from running
> ipmi-sel? Let's see what the problem is.
>
> Al
>
> On Fri, 2009-04-03 at 11:57 -0700, Won De Erick wrote:
> > --- On Fri, 4/3/09, Al Chu <ch...@llnl.gov>
> wrote:
> > > Hey Won,
> > >
> > > The reason for what you're seeing is described in
> the
> > > ipmimonitoring
> > > manpage.
> > >
> > > ---
> > > Interpretation rules have not been written for
> all sensors
> > > permutations
> > > and types. Users may notice some sensors output
> in
> > > ipmi-sensors(8) do
> > > not output in ipmimonitoring. If sensor
> interpretation
> > > rules are needed,
> > > please contact the FreeIPMI maintainers.
> > > ---
> > >
> > > Looking at your sensors output below, there are
> three OEM
> > > sensors that I
> > > can't interpret b/c I don't know the
> interpretation rules
> > > for them. The
> > > Power Unit Device Install and Fan transition
> > > interpretations were
> > > recently added in 0.7.3. So if you update
> to atleast
> > > 0.7.3, those
> > > readings should show up in ipmimonitoring.
> > >
> > > As for why Temperature Sensors aren't showing up,
> this
> > > corner case for
> > > HP machines also appears to have been fixed in
> 0.7..3.
> >
> > Thank you for the tip. I installed the latest, 0.7.6,
> instead.
> >
> > hpdl380-fbsd71r# ipmi-sensors
> > 1: UID Light (OEM Reserved): [OEM State = 0000h]
> > 2: Int. Health LED (OEM Reserved): [OEM State =
> 0000h]
> > 3: Ext. Health LED (OEM Reserved): [OEM State =
> 0000h]
> > 4: Power Supply 1 (Power Supply): [Presence detected]
> > 5: Power Supply 2 (Power Supply): [NA]
> > 6: Power Supplies (Power Supply):
> [Non-redundant:Sufficient Resources from Redun
>
> dant]
> > 8: VRM 1 (Power Unit): [Device Inserted/Device
> Present]
> > 9: VRM 2 (Power Unit): [Device Inserted/Device
> Present]
> > 10: Fan 1 (Fan): [transition to Running]
> > 11: Fan 2 (Fan): [transition to Running]
> > 12: Fan 3 (Fan): [transition to Running]
> > 13: Fan 4 (Fan): [transition to Running]
> > 14: Fan 5 (Fan): [transition to Running]
> > 15: Fan 6 (Fan): [transition to Running]
> > 16: Fans (Fan): [Fully Redundant]
> > 18: Temp 1 (Temperature): 35.00 C (NA/70.00): [OK]
> > 19: Temp 2 (Temperature): 17.00 C (NA/39.00): [OK]
> > 20: Temp 3 (Temperature): 30.00 C (NA/127.00): [OK]
> > 21: Temp 4 (Temperature): 30.00 C (NA/127.00): [OK]
> > 22: Temp 5 (Temperature): 46.00 C (NA/77.00): [OK]
> > 23: Temp 6 (Temperature): 30.00 C (NA/127.00): [OK]
> > 24: Temp 7 (Temperature): 30.00 C (NA/127.00): [OK]
> > 25: Power Meter (Current): [Device Enabled]
> >
> >
> > hpdl380-fbsd71r# ipmimonitoring
> > Record_ID | Sensor Name | Sensor Group | Monitoring
> Status| Sensor Units | Sensor Reading
> > 4 | Power Supply 1 | Power Supply | Nominal | N/A |
> 'Presence detected'
> > 6 | Power Supplies | Power Supply | Critical | N/A |
> 'Non-redundant:Sufficient Resources from Redu
> ndant'
> > 8 | VRM 1 | Power Unit | Nominal | N/A | 'Device
> Inserted/Device Present'
> > 9 | VRM 2 | Power Unit | Nominal | N/A | 'Device
> Inserted/Device Present'
> > 10 | Fan 1 | Fan | Nominal | N/A | 'transition to
> Running'
> > 11 | Fan 2 | Fan | Nominal | N/A | 'transition to
> Running'
> > 12 | Fan 3 | Fan | Nominal | N/A | 'transition to
> Running'
> > 13 | Fan 4 | Fan | Nominal | N/A | 'transition to
> Running'
> > 14 | Fan 5 | Fan | Nominal | N/A | 'transition to
> Running'
> > 15 | Fan 6 | Fan | Nominal | N/A | 'transition to
> Running'
> > 16 | Fans | Fan | Nominal | N/A | 'Fully Redundant'
> > 18 | Temp 1 | Temperature | Nominal | C | 35.000000
> > 19 | Temp 2 | Temperature | Nominal | C | 17.000000
> > 20 | Temp 3 | Temperature | Nominal | C | 30.000000
> > 21 | Temp 4 | Temperature | Nominal | C | 30.000000
> > 22 | Temp 5 | Temperature | Nominal | C | 46.000000
> > 23 | Temp 6 | Temperature | Nominal | C | 30.000000
> > 24 | Temp 7 | Temperature | Nominal | C | 30.000000
> > hpdl380-fbsd71r#
> >
> > One thing left is how i can into the SEL. I tried this
> with other tools. None of them gave an output. :(
> >
> > The box is IPMI v2.0-compliant. I can see a lot of
> logs using iLO.
> >
> > Thanks,
> >
> > Won
> >
> >
> >
> >
> >
> >
> --
> Albert Chu
> ch...@llnl.gov
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
>
hpdl380-fbsd71r# ipmi-sel --debug
=====================================================
Get SDR Repository Info Request
=====================================================
[ 20h] = cmd[ 8b]
=====================================================
Get SDR Repository Info Response
=====================================================
[ 20h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = sdr_version_major[ 4b]
[ 5h] = sdr_version_minor[ 4b]
[ 1Ah] = record_count[16b]
[ FFFFh] = free_space[16b]
[ FFFFFFFFh] = most_recent_addition_timestamp[32b]
[ FFFFFFFFh] = most_recent_erase_timestamp[32b]
[ 0h] = get_sdr_repository_allocation_info_command_supported[ 1b]
[ 1h] = reserve_sdr_repository_command_supported[ 1b]
[ 0h] = partial_add_sdr_command_supported[ 1b]
[ 1h] = delete_sdr_command_supported[ 1b]
[ 0h] = reserved[ 1b]
[ 0h] =
modal_non_modal_sdr_repository_update_operation_supported[ 2b]
[ 0h] = overflow_flag[ 1b]
=====================================================
Reserve SEL Request
=====================================================
[ 42h] = cmd[ 8b]
=====================================================
Reserve SEL Response
=====================================================
[ 42h] = cmd[ 8b]
[ C1h] = comp_code[ 8b]
ipmi_cmd_reserve_sel: bad completion code: command invalid/not supported
=====================================================
Get SEL Entry Request
=====================================================
[ 43h] = cmd[ 8b]
[ 0h] = reservation_id[16b]
[ 0h] = record_id[16b]
[ 0h] = offset_into_record[ 8b]
[ FFh] = bytes_to_read[ 8b]
=====================================================
Get SEL Entry Response
=====================================================
[ 43h] = cmd[ 8b]
[ CBh] = comp_code[ 8b]
_______________________________________________
Freeipmi-users mailing list
Freeipmi-users@gnu.org
http://lists.gnu.org/mailman/listinfo/freeipmi-users
