|
Hi all,
I have recently installed Freeradius onto my Linux Slakware box
kernel 2.2.19. After telling my MAX3030 box to use it as an authentication
box i keep getting the following error:
<cut>
rad_recv: Access-Request packet from host 203.x.x.x:1025, id=17x
length=7x Ignorning request from unknown client 203.x.x.x:1025
-- Walking the entire request list --
Nothing to do. Sleeping until we see a request.
</cut>
over and over and over
HELP! I have checked the radius install 4 or 5 times and it is
reading the users file no problem, i have also checked the clients
file and have placed a few entries in it (machinename, IP Address, Ip
Address:1025 and so on) to try and cover every angle that the MAX might be
passing through as it's client ID. I have removed the <secret> from
both the clients file and the MAX numerous times still to no joy..
At the moment my MAX authenticates via RadiusNT and has no problems
but for obvious reasons i would like to get it changed over to Linux and
Freeradius.
Any help would be greatly appreciated.
Regards,
Tim Jennings
Webquarters (Australia) Pty Ltd
|
