I downloaded the cvs and recompiled and am having the same issue.
> >radiusd: Starting - reading configuration files ...
> >radiusd: /usr/local/etc/raddb/attrs[107]: Syntax error: Previous line is
> >missing a trailing comma for entry realm.com
/usr/local/etc/raddb/attrs (remove X-Ascend-Data-Filter != 0, and radius
starts fine) I have tried several variation on the expression match for that
attribute and get the same results. If I place the X-Ascend-Data-Filter != 0
at the end of the section in attrs file radius starts but doesn't proxy the
attribute.
realm.com
Service-Type == Framed-User,
Framed-IP-Address == 255.255.255.254,
Framed-IP-Netmask == 255.255.255.255,
Framed-Protocol == PPP,
Framed-Compression == Van-Jacobson-TCP-IP,
Framed-Filter-ID =~ ".*",
Reply-Message =~ ".*",
Session-Timeout != 0,
Idle-Timeout != 0,
X-Ascend-Data-Filter != 0,
Port-Limit <= 4
Actuall proxied response with attr_filter disabled in radius.conf
[root@route-srv raddb]# radtest [EMAIL PROTECTED] core123
xxx.xxx.xxx.xxx:1645 monitor1 ibwotrr
Sending Access-Request of id 133 to xxx.xxx.xxx.xxx:1645
User-Name = [EMAIL PROTECTED]
User-Password =
"\236\024\264E\334V\253?\330\221{\030\341\330\360\212"
NAS-IP-Address = route-srv
NAS-Port-Id = "monitor1"
rad_recv: Access-Accept packet from host xxx.xxx.xxx.xxx:1645, id=133,
length=219
Proxy-State = 0x313333
Framed-IP-Address = 255.255.255.254
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Netmask = 255.255.255.255
X-Ascend-Data-Filter = "ip input forward tcp est"
X-Ascend-Data-Filter = "ip input forward 0 dstip xxx.xxx.xxx.xxx/29"
X-Ascend-Data-Filter = "ip input forward 0 dstip xxx.xxx.xxx.xxx/29"
X-Ascend-Data-Filter = "ip input drop tcp dstport = 25"
X-Ascend-Data-Filter = "ip input forward 0"
Session-Timeout = 31652
Idle-Timeout = 1200
X-Ascend-Assign-IP-Pool = 14
Framed-Routing = None
Framed-Compression = Van-Jacobson-TCP-IP
Thanks
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
