Hi Frank! > I was having the same problem while testing with radtest and NTRadPing, no > radutmp or radwtmp even though they were listed in my config. WELL, I just > did a real life test and dialed in with a modem to a PortMaster, and presto, > radutmp and radwtmp both showed up :) So, I'd make sure you do a real life > test before you go and try to take apart FreeRADIUS to see why it's not > generating these files. In my case, the real life test made everything work > as expected.
So you mean, NTRadPing and so on isn't enough / good? Could you check the sequence in your detail file which for the accounting record has been written correctly? It would be nice to know the right meaning of all those starts, ons and whatsoever. > As a side note, I also installed and configured the dialup_admin scripts. > VERY NICE! Good job to whoever is responsible for them! Where can I find these files anyway? I have a 0.5 release version here, they don't even seem to be included, are they? Then: could you please clarify which steps exactly you followed to install all this dialup_admin thingy or instead point to a piece of documentation describing the procedure? Would be nice to be led around the traps if there are any! If you had time, of course! Thank you in advance and sorry for the "not-thru-the-list" stuff here. Artur -- Artur Hecker Groupe Acc�s et Mobilit� [EMAIL PROTECTED] D�partement Informatique et R�seaux +33 1 45 81 7507 46, rue Barrault 75634 Paris cedex 13 http://www.infres.enst.fr ENST Paris - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
