Ok, but what do you mean by this?
> create one instance of the ippool module for each nas
Ben
----- Original Message -----
From: "Kostas Kalevras" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, May 04, 2002 9:54 AM
Subject: Re: IPPOOL
> On Fri, 3 May 2002, Ben Casado wrote:
>
> > This is what we have did to the radiusd.conf file. With this we only get
> > addresses form that range, and that is not what we want.
> >
> > ===================
> > ippool {
> > session-db = "manati.db"
> > ip-index = 196.12.162.64
> > range-start = 196.12.162.65
> > range-stop = 196.12.162.126
> > netmask = 255.255.255.224
> > cache-size = 5000
> > }
> >
> > ===================
> >
> > we have tried various things but cannot get it to give addresses based
on
> > the nas identifier. what are we doing wrong?
> >
> > Thanks
> >
> > Ben
>
> That's not the idea behind the ip_pool module. The idea is to assign ip's
from
> the same pool to all the access servers and not maintain separate pools
for each
> nas. In any case if you want to assign different addresses to each nas you
can
> create one instance of the ippool module for each nas. Then in your
authorize
> section make sure you have the files (users file) module before the ip
pool
> modules. In your users file do something like this:
>
> DEFAULT NAS-IP-Address == 66.108.198.79, Pool-Name := "pool1"
>
> DEFAULT NAS-IP-Address == 66.108.198.80, Pool-Name := "pool2"
>
> while your authorize section will look like this:
>
> authorize {
> files
> pool1
> pool2
> [...]
> }
>
> --
> Kostas Kalevras Network Operations Center
> [EMAIL PROTECTED] National Technical University of Athens, Greece
> Work Phone: +30 10 7721861
> 'Go back to the shadow' Gandalf
>
>
>
>
> -
> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>
****************************************************************************
***************************************
>
****************************************************************************
***************************************
> Scanned by an email protection software that checks: Content, Attachments,
Security and Viruses
> Brought to you by ICENetworks.com, eScan and
MailScan
>
****************************************************************************
***************************************
>
****************************************************************************
***************************************
*******************************************************************************************************************
*******************************************************************************************************************
Scanned by an email protection software that checks: Content, Attachments, Security
and Viruses
Brought to you by ICENetworks.com, eScan and MailScan
*******************************************************************************************************************
*******************************************************************************************************************
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
