The bugfix for Exec-Program-Wait seems to be running nicely. My new problem
that I might not have noticed before is when I'm allowing for multiple logins. Even
though radtest shows an allowance of Port-Limit = 2, upon dialing up via
multilink, I can not.
The router in question is a cisco 5300 running cisco ios 12.2(2)XA as well as a
5400, same ios.
Here's the relevant section of the users file:
DEFAULT Ldap-Group == "multilink", Simultaneous-Use := 2
Port-Limit := 2,
Idle-Timeout = 1800,
Fall-Through = Yes
DEFAULT Simultaneous-Use := 1
Port-Limit = 1,
Idle-Timeout = 1800
Testing with a dialup.
Thu May 23 15:00:07 2002 : Auth: Multiple logins (max 1) : [testjth02] (from client
<edited> port 25)
radtest:
[root@localhost sbin]# radtest testjth02 password localhost 0 secret
Sending Access-Request of id 137 to 127.0.0.1:1812
User-Name = "testjth02"
User-Password = "<edited>"
NAS-IP-Address = <edited>
NAS-Port-Id = "0"
rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=137, length=44
Service-Type = Framed-User
Framed-Protocol = PPP
Port-Limit = 2
Idle-Timeout = 1800
John Hogenmiller, kb3dfz
Systems Administrator, Pennswoods.net
877.716.2002 x 529
---
Anyone could say, "What fantastic and expensive items you have! Oh, how I
wish they were mine!" But I have proven my sincerity by going that extra mile
and actually robbing you blind.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
