i have a cisco 3620 when 700 call in a day and 4 or 5 are similar that you say, but i don't find any error o bug :(
Victor Sanchez ----- Original Message ----- From: "Fduch the Pravking" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, June 20, 2002 11:34 PM Subject: Acct-Stop without Acct-Start on Cisco > I'll try to be clear :) > We have Cisco 2500 with IOS 12.0(4) > and it seems to have such bug... > > Some user tries to log in on this Cisco, > and gets Access-Reject, but Cisco > (I don't know whether it has already > processed Access-Reject at this moment) > sends Accounting-Stop packet for that user > without corresponding Accounting-Start packet. > > Probably, this user disconnects BEFORE > Cisco gets Access-Reject, and then it > decided to send Stop-record... > > Did anybody see such problem and what are > possible workarounds for this sutuations? > > Thanks in advice... > > > These are logs from our proxy freeradius: > > rad_recv: Access-Request packet from host <cisco>:1645, id=38, length=78 > Thread 1 assigned request 4550 > --- Walking the entire request list --- > Threads: total/active/spare threads = 5/1/4 > Nothing to do. Sleeping until we see a request. > Thread 1 handling request 4550, (826 handled so far) > NAS-IP-Address = <cisco> > NAS-Port = 4 > NAS-Port-Type = Async > User-Name = "HACKER" > Called-Station-Id = "" > User-Password = "..." > Service-Type = Framed-User > Framed-Protocol = PPP > ... > Sending Access-Reject of id 38 to <cisco>:1645 > Reply-Message = "*** User HACKER already online!\n\r\n" > Finished request 4550 > Going to the next request > Thread 2 waiting to be assigned a request > rad_recv: Accounting-Request packet from host <cisco>:1646, id=39, length=100 > Thread 3 assigned request 4552 > --- Walking the entire request list --- > Waking up in 6 seconds... > Thread 3 handling request 4552, (826 handled so far) > NAS-IP-Address = <cisco> > NAS-Port = 4 > NAS-Port-Type = Async > User-Name = "HACKER" > Called-Station-Id = "" > Acct-Status-Type = Stop > Acct-Authentic = RADIUS > Service-Type = Framed-User > Acct-Session-Id = "0000A931" > Acct-Input-Packets = 0 > Acct-Output-Packets = 0 > Acct-Session-Time = 0 > Acct-Delay-Time = 0 > ... > > -- > Fduch M. Pravking > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
