> I'm a little confused about what I need to have in order to use EAP authentication with the following setup:
> Cisco 350 series 802.11 access point > Cisco 350 wireless network card > Linux server running freeradius connected to the access point via ethernet. Which Supplicant are you using? > I setup freeradius and configured the access point to talk to it, and when the client card goes to authenticate it appears to work halfway. I see the auth request come in and > the reply go out, but the client always fails to authenticate (after a fairly long timeout). Which EAP-Type authentication did you configure in the server ? > I'm wondering if I'm missing some part of the puzzle. Should freeradius work in this configuration? What I really want is for the radius server to give out per session wep keys > to the clients (as well as a broadcast key), but I don't see any information about how to set this up. If there is some code that needs to be written still, I'm willing to do that since it has a lot of potential for use by my company and out clients. If you are using EAP-TLS in freeradius then there is a patch provided by <[EMAIL PROTECTED]> & <[EMAIL PROTECTED]> for key generation, with the subject EAP-TLS key generation on June 20th in user list archive. If possible, test that patch and let us know your experience. -Raghu - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
