Hi
> I setup freeradius and configured the access point to talk to it, and > when the client card goes to authenticate it appears to work halfway. > I see the auth request come in and the reply go out, but the client > always fails to authenticate (after a fairly long timeout). Hmmm, could you paste some logs using freeradius debug mode? (radiusd -X) It's pretty unclear otherwise... > I'm wondering if I'm missing some part of the puzzle. Should > freeradius work in this configuration? What I really want is for the Yes, EAP (namely EAP/MD5 and EAP/TLS) are supported and work for many people here using the same AP/card combination. Actually, which OS do you use on the supplicant? I.e. what's your supplicant? > radius server to give out per session wep keys to the clients (as well > as a broadcast key), but I don't see any information about how to set This is *NOT* supported yet. Anyway it would only be supported by EAP/TLS, EAP/MD5 does not produce any session keys anyway. Take a look for the "EAP documentation" thread on this mailing list. > this up. If there is some code that needs to be written still, I'm > willing to do that since it has a lot of potential for use by my > company and out clients. As Alan says: "this would be appreciated". Please check the mentioned thread first. Ciao artur -- _____________________________________________________________________ Artur Hecker Groupe Acc�s et Mobilit� hecker[at]enst[dot]fr D�partement Informatique et R�seaux +33 1 45 81 7507 46, rue Barrault 75634 Paris cedex 13 http://www.infres.enst.fr ENST Paris - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
