On Tue, 13 Aug 2002, Guillermo Schimmel wrote:
> It still doesn't work.
>
> >
> > Hi list:
> >
> > I'm starting the tests with the ippool module.
> >
> > I added this line on the users file:
> >
> > DEFAULT NAS-IP-Address == "10.169.255.11", Auth-Type :=
> > Accept, Pool-Name := "prueba"
> >
> > And created an IP pool:
> >
> > ippool prueba {
> > range-start = 10.170.200.1
> > range-stop = 10.170.200.254
> > netmask = 255.255.255.0
> > cache-size = 800
> > session-db = /raddb/db.ippool
> > ip-index = /raddb/db.ipindex
> > }
> >
> I can start the server and it works ok, but it doesn't reply with
> the Framed-IP-Address attribute.
>
> > What am I doing wrong?
> >
> > I'm sorry if this is ANOTHER stupid question.
> >
> > Thanks a lot for your time.
> >
> >
> > Guillermo
Have you added the module in the authorize and accounting sections in
radiusd.conf? Make sure also that ippool comes after the files module in the
authorize section.
--
Kostas Kalevras Network Operations Center
[EMAIL PROTECTED] National Technical University of Athens, Greece
Work Phone: +30 10 7721861
'Go back to the shadow' Gandalf
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
