On Wed, 14 Aug 2002, Guillermo Schimmel wrote:
> Yes, it seems like I have several errors. Now Its working.
>
> Now, I have read that you can use the Pool-Name attribute to select one
> IP Address pool, that's why I started trying this.
> I have to share a NAS for Internet Access and VPN access and I'm going
> to do that by routing and firewalling, assigning different pools based
> on some like group.
>
> So, I define two (or more) pools in radiusd.conf like:
>
> ippool test1 { ...}
> ippool test2 { ...}
> ...
> ippool testn { ...}
>
> And I thought that in the authorization section I had to put "ippool",
> and it would take the Pool-Name attribute to choose a pool.
> But now It seems like I have to put one specific ip pool.
> Could you please tell me which is the correct usage of this feature?
ippool test1 { ... } ippool test2 { ... } are all instances of the ip pool
module. You have to add them all in the authorize and accounting sections in
radiusd.conf and use the Pool-Name attribute to select which one will run.
>
>
> Thank you very very much for your help.
--
Kostas Kalevras Network Operations Center
[EMAIL PROTECTED] National Technical University of Athens, Greece
Work Phone: +30 10 7721861
'Go back to the shadow' Gandalf
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
