At 09:24 AM 8/17/2002 +0200, St�phane KLEIN wrote:
>Hello,
>
>Thanks for your response, i've upgraded to 0.7 and started radiusd -X.
>When i tried to log with a modem, i saw:
>
>Listening on IP address *, ports 1645/udp and 1646/udp.
>Ready to process requests.
>rad_recv: Accounting-Request packet from host mr-max:1132, id=185,
>length=134
> NAS-IP-Address = ip_address
> NAS-Port = 20105
> NAS-Port-Type = Async
> Acct-Status-Type = Stop
> Acct-Delay-Time = 0
> Acct-Session-Id = "270056456"
> X-Ascend-Disconnect-Cause = 45
> X-Ascend-Connect-Progress = 65
> X-Ascend-Xmit-Rate = 50667
> X-Ascend-Data-Rate = 26400
> X-Ascend-PreSession-Time = 30
> X-Ascend-Pre-Input-Octets = 188
> X-Ascend-Pre-Output-Octets = 159
> X-Ascend-Pre-Input-Packets = 6
> X-Ascend-Pre-Output-Packets = 7
> X-Ascend-Modem-PortNo = 10
> X-Ascend-Modem-SlotNo = 6
> Called-Station-Id = "0235"
>modcall: entering group preacct
> rlm_realm: Proxy reply, or no user name. Ignoring.
The NAS is not sending a User-Name attribute for some reason. Fix
this and you'll solve the problem. You should review the NAS documentation,
or attempt to contact Lucent for support.
-Chris
--
\\\|||/// \ StarNet Inc. \ Chris Parker
\ ~ ~ / \ WX *is* Wireless! \ Director, Engineering
| @ @ | \ http://www.starnetwx.net \ (847) 963-0116
oOo---(_)---oOo--\------------------------------------------------------
\ Wholesale Internet Services - http://www.megapop.net
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
